The shredder is suitable for central kitchens, group meals, large enterprises, military units, government offices, school canteens, vegetable and side dish centers, food processing plants, vegetable and other agricultural product processing plants and other places. The whole machine is imported from Taiwan and adoptsMade of 304 stainless steel, the body and frame do not rust, which increases the service life of this machine. It is widely used to quickly grind garlic, ginger, chili, pumpkin, yam, carrots, and other fruits and vegetables into a paste or granular form. This machine is easy to operate, easy to clean, aesthetically pleasing, durable, labor-saving, and saves water and electricity. One machine can support up to 25 workers and meet the production needs of a wide range of users.

Structural composition

The whole machine is composed of stainless steel and rotary blades, with imported cutting tools, Taiwanese motors, stainless steel hoppers, etc. forming the crushing and cutting part.

Working principle

The cutting part of the whole machine is composed of stainless steel and rotary blades, with imported cutting tools. Put the raw materials into the feeding port, and the machine uses a rotating blade set (with ten blades inside, each blade has six sides) to quickly rotate and cut without dead corners. It can crush vegetables and fruits such as garlic, ginger, carrots, peppers, pumpkins, cucumbers, and yams into a paste or granular form.

product name	productmodel	External dimensions
Crusher	HYTW-813	800*380*1000MM
production capacity	power	Machine weight
600-800KG/H	2.2KW/380V	110kg

install 1. The machine operating equipment should be placed on a horizontal surface to ensure that the machine is stable 2. Check that the plugs of the machine equipment are in good contact, without looseness or water marks 3. Check if there are any foreign objects in the feeding cylinder, and clean them if there are any Clean to avoid tool damage. 4. When using the machine, the power installation must be kept stable380V。

Operation begins 1. The use of a shredder allows for the selection of the number of cutting tools based on the raw materials being cut. 2. After everything is normal, pour the material to be crushed evenly into the hopper (note that the particles of the crushed material should not be too large. If they are too large, they can be crushed to a certain size first. If one crushing does not meet the required requirements, they can be repeated until they are reached.) 3. After breaking the work, turn off the power. Attention: The installation and wiring of this device should be carried out by qualified and skilled technicians.

1. After the machine completes the crushing work, turn off the power and clean the material bucket.

2. Regular maintenance of machine operating parts should be carried out to extend the service life of the machine.

3. Do not place metal or hard objects on the machine to avoid falling into the feeding port and damaging the blades and machine.