Customization of 1000G chlorine dioxide generator

It refers totwoThe product model of the chlorine oxide generator and the specification parameters of the chlorine dioxide generator are based on the effective chlorine production rate of 100 per hour of the equipment0G/h refers to the maximum effective chlorine production per hour of the product, which is 1000 grams，Chlorine dioxide generators are divided into two categories: pure chlorine dioxide disinfectant generators and chlorine dioxide composite disinfectant generators. As the name suggests, the product generated by a pure chlorine dioxide disinfectant generator is chlorine dioxide, while a chlorine dioxide composite disinfectant generator generates a mixed solution of chlorine dioxide and LV gas.

The specifications of chlorine dioxide generators are determined based on the chlorine dioxide production rate (g/h) of the equipment. The specifications of the chlorine dioxide composite disinfectant generator are determined based on the effective chlorine production rate (g/h) of the equipment.

Water jet injector: A water jet injector is a pumping element designed based on the principle of jet flow. When the power water passes through the water jet injector, negative pressure is generated inside, and external gas is sucked into the water jet injector under the pressure difference, thereby achieving suction.

Regulating valve: There is a conical rod in the middle of the regulating valve, and rotating the conical branch can achieve micro adjustment of the feeding. There are two "0" rings on the conical rod that serve as seals and can be replaced after wear.

Air intake pipe: The air passage for equipment operation. During installation, the air intake pipe should extend outside and remain connected to the atmosphere. When sucking material, the valve of the air intake pipe should be closed, and all other states should be open.

Safety valve: The safety valve serves as a specific pressure relief pathway when the equipment is not operating properly. After the safety valve is opened, tighten the rubber stopper again.

Temperature control system: The function of the temperature control system is to achieve temperature control, and the temperature of the heated water is set at the factory

Customization of 1000G chlorine dioxide generator