The DMF-ZM-40 speed connected electromagnetic pulse valve is a right angle valve similar to the series, suitable for the installation and connection of air pockets and dust collector spray pipes. Its inlet and outlet ends are equipped with fixing nuts for installation, making installation and use convenient.
Working principle of DMF-ZM-40 speed connected electromagnetic pulse valve
The diaphragm divides the electromagnetic pulse valve into two chambers, front and rear. When compressed air is connected, the compressed air enters the rear chamber through the throttle hole. At this time, the pressure in the rear chamber presses the diaphragm assembly tightly against the output port of the valve, and the electromagnetic pulse valve is in the "" position; Close” Status.
The electrical signal of the pulse injection control device causes the electromagnetic pulse valve armature to move backwards, the exhaust hole in the rear chamber of the valve to open, the rear chamber loses pressure, the diaphragm component moves backwards, and compressed air is injected through the valve output port. The electromagnetic pulse valve is in the“ position; Open” Status. DMF-ZM-40 Speed Connected Electromagnetic Pulse Valve
The electrical signal of the pulse jet control instrument disappears, the electromagnetic pulse valve armature resets, the exhaust hole in the rear chamber closes, and the pressure in the rear chamber increases, causing the diaphragm component to tightly adhere to the output port of the valve. The electromagnetic pulse valve is then in a state of“ Close” Status.