A bubble wrap packaging machine with small volume, compact and flexible structure, and high production efficiency.

The overall design and manufacturing comply with GMP requirements:

Covering an area of 2 square meters, it can produce up to 240 panels per minute with a new structure that maximizes customer satisfaction. The whole machine adopts a frame type fully enclosed structure, and high-quality stainless steel is used as the material in contact with the drug. The material tray and roller brush in the feeding mechanism are easy to disassemble and clean, convenient and fast.

Replacing molds is simple and fast:

When adjusting the machine by changing the size of the plate and replacing the mold, it can be quickly achieved in a short period of time without the need for advanced technicians and special tools.

The main components and key parts are matched with well-known foreign brands to ensure smooth and reliable operation.

The temperature control of PVC heaters and hot press roller heaters is accurate, safe and reliable, and will not cause damage to packaging materials and drugs.

The whole machine is automatically controlled by a computer, and the running speed is infinitely adjustable.

Non waste horizontal edge punching saves packaging materials. Before punching, a push plate step is used to make the plate flat and easy to adjust reliably.

The DPH130 blister packaging machine has extraordinary features:

The temperature field of the heating plate on the preheating table of this machine is uniform and the control is reliable. The set temperature has an error of ± 2 degrees from the actual temperature, which can adapt to a wide range of thermoplastic forming materials:

PVC, PP, PVC-PVDC, PVDC-PE-PVDC, etc

Especially for packaging materials with a narrow temperature range of thermoplastics, they can better demonstrate their uniqueness.

The PVC stepping method features two pneumatic clamps before the PVC heating plate and after the forming table. Due to the use of dual clamping steps, it can prevent the PVC sheets that have already been heated in the heating area from being stretched and deformed due to rapid pulling and movement, which may affect the quality of the blister. This machine can achieve high-speed molding while ensuring good blister quality.

The PVC lower heating plate moves intermittently with the up and down movement of the forming table mold. When the PVC clamp moves, the lower heating plate is at the bottom dead center (there is a gap between the upper and lower heating plates), reducing the contact between PVC and the heating plate, and the PVC does not stick to the sheet.

If the shape of the blister is complex and the molding depth is large, exceeding the deformation range of positive pressure blowing molding, an auxiliary punch can be added to the molding table to achieve mechanical and pneumatic dual action molding, ensuring uniform and firm wall thickness of the blister.

The disposable filling platform can be adjusted freely. When changing the size of the board or changing the packaging variety, there is no need to change the platform, only simple adjustments can be made, and it can be completed in 2 minutes.

It can be turned on and off at any time, and the PVC board has no signs of shutdown.

All external working components, including moving parts and heating elements, are protected by protective covers to ensure work safety.

Equipped with a plate leveling mechanism, the plates are smooth and aesthetically pleasing, making them easy to organize and pack later.

Easy to operate, most adjustment parts and mold replacements can be completed in a short period of time without the need for special tools.

The transmission parts and various components are easy to manually operate, making daily maintenance and upkeep extremely convenient.

Users can request special configurations as needed when placing orders

Filling feeder: It can be used as a roller brush feeder, a universal roller brush extended feeder, a capsule turning feeder, and a high-speed dedicated (flat sheet, capsule) feeder.

Control part: ordinary control, human-machine interface control.

Automatic detection: photoelectric automatic detection, camera automatic detection.

Platform: regular type, extended type.

Conveyor: 1.5-meter conveyor.

Plate arrangement, production efficiency reference table

The photos and illustrations in the sample only represent the DPH130 standard cover. If there are any special needs or uncertainties, please contact the company's technical department

Technical specifications are subject to change without prior notice.

DPH130B Aluminum-plastic Blister Packing Machine

With small size and compact configuration, the blister packing machine is flexible with higher production efficiency。

Designed and manufactured as the requirements of GMP:

Covered 2 square meters, the machine can product 240 pieces plates per minute with its new-type structure to meet the demand of customers at large. Adopted totally-enclosed frame structure, the machine selects the high quality stainless steel to contact with the drugs, and it dismantles and cleans the charging tray and roll brush of the feeding mechanism conveniently and quickly。

Replace the mouse easily and quickly:

Adjust the machine without senior technicians and special tools after changing the size of plates and replacing the mold The adjustment can be fulfilled in a short time.。

Select the parts of foreign famous brands as the chief parts and fittings to ensure the work is stable and reliable.

The temperature control to PVC heat exchanger and the hot pressing roller heat exchanger is accurate and reliable without any harm to the packing material and the medicine.

The whole machine is controlled by the computer, and its speed is regulated sleeplessly

Horizontal sides cutting without scraping can save packing material Adopting push-type stepping as the front stepping of blanking makes the plate flat and easy to adjust as well as reliable.

DPH130 Froth COVER Packaging Machine has excellent features:

The heating plate on the preheating table of this machine is characterized by even temperature field and reliable control, the error being ±2 degrees between set temperature and actual temperature. It is applicable to extensive hot forming materials;

PVC、PP、PVC-PVDC、PVDC-PE-PVDC

Especially packaging materials of a narrow range of hot forming temperature to show its uniqueness.

PVC stepping mode: it features an air-powered clamping device on both before PVC heating plate and behind forming table. The adoption of double clamping stepping prevents PVC chip in the heating area from tension and deformation as a result of rapid stretching and moving, which would affect the quality of froth-cover. This machine can achieve high-efficient forming with a guaranteed quality of forth cover.

The lower heating plate makes intermittent motion along with the forming table moves upward and downward When PVC clamping device moves, the lower heating plate is at bottom dead center (there is a gap between the upper and lower heating plates), minimizing PVC’s direct contact with the heating plate, thus PVC is not sticky.

If the frost over is complex in shape and forming depth, beyond the distortion range of blow forming with positive pressure, then a forming auxiliary punch can add to forming table, turning into mechanical and pneumatic forming to ensure the thickness of froth-cover is stiff and smooth.

The Infilling platform can be easily adjusted There is no need to change the platform when the size or packaging type is to be replaced. The adjustment can be easily done in two minutes.

The machine can be turned on and off at any required time without the trace of shutdown at the PVC plate

Those external moving and heating parts are all protected by protective hooks to ensure their safety

With a plate smoothing function, make the plate smooth and beautiful and also convenient to further tidy and pack.

Easy operation, most adjusting parts and moulds can be replaced in a short time without the use of special tools.

Transmission parts and all other parts are easy to operate manually and conveniently to keep maintenance on a daily basis

　　Consumers may require special configuration based on their own needs when making an order.

Filling feeder: variety includes roller brush feeder, common roller brush extended feeder, capsule adjusting feeder and high speed (slice, capsule) feeder.

Control part: general control, man-machine interface control

Automatic detection: photoelectric automatic detection, photographic automatic detection.

Table: common type and extended type

Conveyor: a conveyor of 1.5 meters.

　　Reference Table of Plate Arrangement and Productive Efficiency

Photos and illustrations of the sample only show DPH130 common type mask matching Please contact the technology department of the company for special requirements or problems.

Technical specifications are subject to change without prior notice