1DS-800 Organic Glass Water CollectorMain purpose:

Field water sampling is used for collecting water samples from surface waters such as rivers, lakes, and reservoirs at depths of 0-30m.

IIDS-800 Organic Glass Water CollectorTechnical parameters:

Water collection bottle body: made of organic glass material, weighted with lead blocks, the upper and lower covers can be easily flipped to achieve opening and closing;

Capacity: 1000mL, 2500mL, 5000mL;

Sampling depth: 0-30m;

Temperature gauge: Temperature measurement error ± 1 ℃;

Organic glass water sampler: composed of a barrel body, two semi-circular covers with shafts, and a movable bottom plate, used for collecting seawater samples at sea.

3、 Application areas:

Used for the collection of aquatic biological samples, as well as for the collection of water quality samples other than bacterial indicators and oils. The sampling of phytoplankton can be done using an organic glass water sampler. (Note: When using, pay attention to first clamp the rubber tube at the water outlet, and then open the two semi-circular upper covers. Let the water collector sink into the water, and the bottom inlet will automatically open. Water samples from different depths can be collected. Tie a rope on top, let water enter below, and let water exit above. When the water collector stops at different depths, the water sample collected is at this level. The sinking depth should be marked on the rope. When sinking to the desired depth, lift the rope up, and the upper cover and lower inlet will automatically close. After lifting the water surface, do not touch the bottom to prevent water leakage. Insert the rubber tube at the water outlet into the container mouth, release the iron clip, and the water sample will be injected into the container.) Quantitative sample collection, in still water and... Collect slowly flowing water using an organic glass sampler.