Picture Collection

Use on-site
　　Application ClientProduct Detailssummary:DWD seriesbelt dryer
It is a new generation of belt conveyor developed and produced by our factory based on years of practical experience and advanced technology of similar products at home and abroad
　　Drying equipment
The device structure is more reasonable, with a wider range of applications, stable and convenient operation, and high thermal efficiency. The main structural feature is that the heat exchanger is placed on the side of the mesh belt, effectively avoiding poor contact between materials and the heat exchanger, such as powder particles leaking onto the heat exchanger and affecting the effectiveness of the radiator. This equipment is widely used in industries such as chemical, organic pigments, dyes, mineral products, feed, food, etc. It is an ideal and reliable production equipment for users.
Principle:
The material to be dried is evenly distributed on the mesh belt through an appropriate feeding mechanism. During drying, hot air is forcibly input from above and below the mesh belt and the material, making the surface of each particle to be dried a heating surface. This significantly increases the contact area between the material and the hot air, significantly increasing the thermal conductivity area and shortening the diffusion distance of moisture inside the material. Therefore, it is possible to perform highly effective drying operations, especially for the dried material after adding appropriate pre forming before drying. Therefore, choosing this series of dryers has the advantages of high stability and high energy saving.
Application:
Suitable for drying pre formed paste like and paste like materials such as pigments and dyes. Suitable for chemical industry drugs, fertilizers, feed, and various granular, flaky, fibrous, cake like objects such as polymer, iron oxide, ferrite, fluorite, pharmaceuticals, seasonings, agar, etc.
characteristic:
The best drying effect can be achieved by adjusting the air volume, temperature, and material residence time. Due to the ability to freely adjust the flow rate and residence time of materials in the drying device. Therefore, the moisture content of the processed product can be set arbitrarily.
The material moves in a stationary state inside the drying device. It can hardly damage the shape of the product, and even if there is a small amount of dust flying, it can be collected by setting a weak wind or bag filter on the pipeline. Various conveyor belts can be used. According to different dry materials, in addition to various metal wire meshes, the conveyor belt can also use a vibrating plate.

The conveyor belt can be cleaned. The heating chamber and drying chamber are separated, making it easier to clean the conveyor belt. According to the requirements, a cleaning device can be installed on the bottom plate of the equipment to scrape a small amount of material that falls on the bottom plate to the discharge end.