Model of flame arrester for diesel storage tank:ZGB-1
Diesel storage tank flame arresters are important safety equipment used for installing fixed top storage tanks for crude oil, gasoline, kerosene, diesel, aromatics, sulfur, and other fuels. Its function is to prevent suffocation of flames,
According to national standardsGB5908-86Qualified through standard testing,This product is widely availableWidely applied to oil storage tanks,It is to prevent accidental ignition from entering the tank,Prevent accidents,It is an ideal product for tank fire prevention.
阻火器工作原理Most flame arresters are composed of solid materials with many small, uniform, or non-uniform channels or pores that can pass through gas
orPores should be as small as possible, so small that they can pass through flamesTo. like thisAfter entering the flame arrester, the flame splits into many small flame streams and is extinguished. A machine that can extinguish flames
reasonIt is the heat transfer effect and wall effect.
Diesel storage tank flame arrester standard: flange standard:GBTheHGTheSHTheHGJTheJBTheANSLTheJISWaiting for standards. (User specified, please indicate pressure level) Execution standard:GB13347-92
Fire resistance performance and testing methods of flame arresters for petroleum gas pipelinesThe lawSH/T3413-99Selection, Inspection, and Acceptance of Fire Arresters for Petrochemical Petroleum Gas PipelineHG/T20570.19-95The Resistance
The setting of firearms. Production, inspection, and acceptance standards for flame arresters:SY/T0512-1996Fire arresters for oil storage tanksTest basis:GB5908-86Performance and experimental methods of flame arresters for oil storage tanks.
Reference standards:
GB/T4237-1992Stainless steel hot-rolled steel plate
GB/T6414-1986Dimensional tolerance of castings
GB/T9438-1988Technical conditions for aluminum alloy castings
GB/T9439-1988Grey cast iron parts
GB 5908-1986Fire resistance performance and experimental methods of flame arresters for oil storage tanks
GB/T1804-1992General tolerances for linear dimensions without specified tolerances
GB/T13306-1991sign
GB/T13384-1992General Technical Conditions for Packaging of Mechanical and Electrical Products
JB 78-59cast iron flange
SY 5302-87General technical parameters for grey cast iron parts used in petroleum drilling and production machinery products
ZB G 33001-85PTFE tube
ZB G 33003-85Polytetrafluoroethylene rod
Performance of flame arrester for diesel storage tank:
1Qualified explosion resistance performance,continuous13The secondary explosion resistance performance test can block fire every time.
2Qualified fire resistance performance, fire resistance test1There is no tempering phenomenon within hours.
3The shell water pressure test is qualified. This product has a reasonable structure, light weight, and corrosion resistance. Easy to maintain and install. The flame arrester core is made of stainless steel material,Corrosion resistant and easy to clean.
Dimensions of flame arresters for diesel storage tanks:PN1.0MPa
|
Nominal diameter (mm) |
Installation size(mm) |
||||
|
L |
H |
D |
K |
n-d |
|
|
DN25 |
130 |
150 |
115 |
85 |
4*14 |
|
DN32 |
155 |
170 |
135 |
100 |
4*18 |
|
DN40 |
155 |
170 |
145 |
110 |
4*18 |
|
DN50 |
170 |
180 |
160 |
125 |
4*18 |
|
DN65 |
190 |
185 |
180 |
145 |
4*18 |
|
DN80 |
220 |
200 |
195 |
160 |
8*18 |
|
DN100 |
240 |
210 |
215 |
180 |
8*18 |
|
DN150 |
320 |
250 |
280 |
240 |
8*22 |
|
DN200 |
270 |
270 |
335 |
295 |
8*22 |
|
DN250 |
440 |
300 |
395 |
350 |
12*22 |
|
DN300 |
500 |
400 |
460 |
410 |
12*22 |
Diesel storage tank flame arresters should be regularly inspected and maintained:
1The flame arrester should be inspected every six months to check whether the flame arrester core is blocked, deformed, corroded, etc.
2The blocked fire-resistant layer core should be cleaned thoroughly to ensure that each hole on the core is unobstructed, and any deformed or corroded fire-resistant layer should be replaced.
3When reinstalling the fire-resistant layer core, it should be ensured that the joint surface is tight and there is no air leakage.
Shanghai Nanshi is a professionalFlame arrester production plantHome, products produced by the company: breathing valves, flame arresters, fire-resistant breathable caps, fire-resistant vacuum pressure caps, aluminum alloy ball valves, aluminum alloy single
Flange ball valve, oil discharge port, double door bottom valve, oil measuring hole and other seriesSupporting attachments.
Welcome to visit our website【http://www.shhxfcj.com】,If you have any questions.You can call us,We will do our best to provide you with high-quality service.
Telephone:.
