[Digital Conference Unit (Chairman/Representative)]

1. Embedded installation design, providing 8-core dedicated connectors (supporting conversion to RJ45 network cables);

2. Built in speech timing and countdown functions, when the microphone is turned on to speak, the OLED screen displays the time, making it convenient for speakers to control the duration of their speech;

3. Equipped with an OLED display screen of no less than 1.3 inches, it can display the current conference mode, microphone ID number, and microphone speaking status in real-time;

4. Built in gold-plated diaphragm capacitor microphone core, using a pluggable gooseneck microphone with a red speech indicator halo;

5. Embedded installation design, built-in touch button switch (non-traditional mechanical button), with waterproof and dustproof functions;

6. The microphone unit is provided with DC24V power by the system host, which is within the safe range. The microphone supports hot swapping, and small expansion power supplies can be connected between units to achieve single line long-distance segmented power supply;

7. The microphone supports third-party central control for video tracking, opening and closing. The central control and conference system host use industrial RS232 communication protocol codes;

8. The chairman unit is not limited by the conference mode and can be placed in any position. It has the function of fully controlling the order of the conference and can close all open representative units. Pressing and holding the priority key can temporarily mute the representative's ability to interrupt and speak, and releasing it will restore the representative's original state (there is no temporary interrupt function in the application mode, the priority key in the application mode can be briefly pressed to approve the representative's request to speak and open it, and long pressing the priority key can cut off the representative unit and the unit in the application)

9. The microphone has high-intensity anti mobile RF interference technology;

Technical Specifications

Input/output: 8P-DIN (supports conversion to RJ45 Ethernet cable)

Input: Unidirectional condenser microphone

Working voltage power supply: DC24V (supplied by the host)

Power loss current drain: 70mA

Sensitivity: -47dB

Signal to noise ratio s/n: 65dB

Frequency response: 100-10KHz

Weight: Approximately 0.8kg

Dimensions (W, D, H) dimension: 150 × 55 × 94mm (excluding microphone rod)

Installation: Embedded

Mic Stem Length: 420mm Gooseneck Mic Stem Activity