VIP member
Digital Multi way Valve Fully Automatic Softener (Softening Water Equipment)
Digital Multi way Valve Fully Automatic Softener (Softening Water Equipment)
Product details
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
The softened water equipment adopts a digital display multi way valve for regeneration according to flow rate or time, with a flow rate of 3 tons per hour of effluent. It has the advantages of high automation and low salt consumption, and is used for boiler water softening, chemical water, hotels, laundry rooms, domestic water, textile industry, and softened water selection equipment.
1、 Fully automatic operation of softened water equipment
Due to the use of computer online monitoring in the fully automatic water softener of the boiler, continuous operation and fully automatic operation of the regeneration process have been achieved. The entire process is free from manual interference, and there will be no advance or delay in the operation of the process. Moreover, the switching of each process is almost synchronized, therefore, the entire device is accurate, reliable, and efficient; Save water, salt, electricity, and labor. The cost of water production is low.
2、 Advanced technology and smooth operation of softened water equipment
3、 Softening water equipment does not require a dedicated salt production system 4、 Compact structure and small footprint 5、 Easy to operate and manage 6、 Extremely low annual operating costs Softening water equipmentSystem composition: JSYSelection Table for Single Tank and Single Valve Flow Type of Series Fully Automatic Water Softener Processing water volume (T/h) Exchange specification Regeneration box Installation size D × H × number (mm) Volume L JSY-WT-0.5 0.5 Φ200×1100×1 370*800×1 60 1×0.8×1.6 JSY-WT-1 1 Φ250×1350×1 370*800×1 60 1×0.8×1.6 JSY-WT-2 2 Φ300×1400×1 400*900×1 100 1×0.8×1.6 JSY-WT-3 3 Φ350×1650×1 500*1100×1 200 1.5×1×2 JSY-WT-4 4 Φ400×1650×1 500*1100×1 200 1.5×1.5×2 JSY-WT-6 6 Φ500×1750×1 650*1080×1 350 2×2×2.5 JSY-WT-8 8 Φ600×1900×1 800*1180×1 500 2×2×2.5 JSY-WT-10 10 Φ750×1900×1 940*1280×1 800 2.8×2×2.5 JSY-WT-15 15 Φ900×2100×1 1000*1380×1 1000 3×2.5×3 JSY-WT-20 20 Φ1000×1900×1 1000*1380×1 1000 3×2.5×3 JSY-WT-25 25 Φ1200×2300×1 1360*1650×1 2000 3.5×2.5×3 JSY-WT-30 30 Φ1200×2300×1 1360*1650×1 2000 3.5×2.5×3 JSY-WT-35 35 Φ1500×2400×1 1360*1650×1 2000 3.5×2.5×3.5 JSY-WT-40 40 Φ1500×2400×1 1360*1650×1 2000 3.5×2.5×3.5 JSY-WT-50 50 Φ1800×2400×1 1360*1650×1 2000 4×3×3.5 Processing water volume (T/h) Exchange specification Regeneration box Installation size D × H × number (mm) Volume L JSY-WT-0.5B 0.5 Φ200×1100×2 370*800×2 60 2×0.8×1.6 JSY-WT-1B 1 Φ250×1350×2 370*800×2 60 2×0.8×1.6 JSY-WT-2B 2 Φ300×1400×2 400*900×2 100 2×0.8×1.6 JSY-WT-3B 3 Φ350×1650×2 500*1100×2 200 3×1×2 JSY-WT-4B 4 Φ400×1650×2 500*1100×2 200 3×1.5×2 JSY-WT-6B 6 Φ500×1750×2 650*1080×2 350 4×2×2.5 JSY-WT-8B 8 Φ600×1900×2 800*1180×2 500 4×2×2.5 JSY-WT-10B 10 Φ750×1900×2 940*1280×2 800 4.8×2×2.5 JSY-WT-15B 15 Φ900×2100×2 1000*1380×2 1000 6×2.5×3 JSY-WT-20B 20 Φ1000×1900×2 1000*1380×2 1000 6×2.5×3 JSY-WT-25B 25 Φ1200×2300×2 1360*1650×2 2000 7×2.5×3 JSY-WT-30B 30 Φ1200×2300×2 1360*1650×2 2000 7×2.5×3 JSY-WT-35B 35 Φ1500×2400×2 1360*1650×2 2000 7×2.5×3.5 JSY-WT-40B 40 Φ1500×2400×2 1360*1650×2 2000 7×2.5×3.5 JSY-WT-50B 50 Φ1800×2400×2 1360*1650×2 2000 8×3×3.5
The softened water equipment operates centrally with a multi-channel servo valve equipped with a timer, and is equipped with a modern microcomputer control system, elevating the equipment to a higher level; The system is safe and reliable, with a low failure rate and significantly improved scientific management. The computer also has the function of automatically adjusting and compensating for the remaining water volume to keep it running. For example, the regeneration time can be set at 2 o'clock in the morning to avoid peak hours. During regeneration, the computer can automatically estimate the average water production rate of the system over the past seven days and compare it with the current remaining amount to determine whether to issue a regeneration command. Non volatile memory (NOVRAM) is also used on the device. Once the power is lost, all data on the computer can be saved for a longer period of time, and it can automatically resume transmission after power is restored. All valve bodies are made of refined plastic steel and adopt valve disc self pressure or cylinder sealing technology to prevent leakage, blockage, corrosion, and solve the pollution problem of exchange resin.
The softened water equipment cleverly designs a self-priming sprayer powered by the inlet water pressure in the multi-channel servo valve, which performs salt suction and water replenishment at regular intervals according to the process requirements. The preparation of the entire saltwater only requires a lightweight salt tank with a diameter of 500-1000 millimeters and a height of 1000 millimeters, equipped with a compact water level controller, located near the exchange tank. Eliminated the salt pond. Salt pumps, necessary transmission and distribution pipelines, and power distribution devices also eliminate the need for additional investment in dedicated water treatment rooms.
The entire set of softened water equipment is designed reasonably, configured delicately, and lightweight, and can be assembled on generally flat cement floors. No need for a dedicated foundation. A device with a water production capacity of 1T/H occupies only 1 square meter. The standardized assembly of accessories only takes 1-2 days for debugging, training, and completion of water production and production.
As long as the initial data setting of the softened water equipment is correct, the system can operate faithfully and accurately according to the established program. In addition to daily monitoring of the computer display screen, all the operations of the operator are to add salt to the salt box in a timed and quantitative manner. So general operators can quickly get started and independently supervise after necessary explanations. Almost all users do not have dedicated positions, but are managed by stokers
According to preliminary statistics and calculations of hundreds of different models of soft water equipment, due to their water, electricity, salt, and labor savings, the cost of producing one cubic meter of qualified soft water is approximately 2.5 yuan cheaper on average than traditional water treatment methods. The initial investment of the entire device can be recovered in the same year
Import pressure: 0.2Mpa-0.6Mpa
Working temperature: 2-50 ℃
Power supply: 220V/50Hz
Raw water hardness: ≤ 6.4mmol/L
Water hardness: ≤ 0.03mmol/L
Layout form: Single tank or multiple tanks in parallel
Regeneration method: co current regeneration
Operating Procedure: Automatic Program Control
Resin used: Strong acidic cation exchange resin.
Fully automatic control valve+fiberglass resin tank+exchange resin+PE salt tank
Application of softened water equipment:
Water softeners are generally used in front of reverse osmosis devices to reduce or remove Ca2+and Mg2+ions in water, prolong the time for inorganic salt scaling to occur in the reverse osmosis system, and protect the reverse osmosis membrane system. Applied to boiler water softening, chemical water, hotels, laundry rooms, domestic water, textile industry, as well as reverse osmosis pretreatment and other occasions.
model
D × H (mm) × number
Length L x Width W x Height H (m)
JSYSelection Table for Series Fully Automatic Water Softener Double Tank Double Valve (Continuous Discharge)
model
D × H (mm) × number
Length L x Width W x Height H (m)
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-