A digital hydraulic bending machine is a type of machine tool that can display feed parameters through a digital tube/display screen, typically used for bending sheet metal materials.

Digital hydraulic bending machine supporting system:

1. Taiwanese Delta touch screen Chinese CNC system (or Dutch DELEM CNC system): It has one-way and two-way positioning functions, can adjust screw clearance, has retreat material selection function, avoids interference between material blocking device and workpiece, reduces wear, improves positioning accuracy, and has automatic or manual search reference point function. Equipped with power-off position memory function, it provides on-site protection for parameters, positions, and programs. Equipped with multi-step machining programming function, it can achieve multi-step dynamic operation, complete one-step machining of multi-step parts, and improve production efficiency. One axis servo motor automatically controls the up and down stroke adjustment of the slider, while the other axis servo motor controls the rear stop material. Select Taiwan ABBA ball screw guide pair.

2. The main sealing components of the oil cylinder are produced by the Japanese company Huarka.

3. The main components inside the electrical box are produced by Schneider in France.

4. All hydraulic systems are controlled by plug-in valves.

5. The hydraulic pump adopts aerospace standard low-noise internal gear pump.

6. The whole machine is welded from steel plates, and the welding parts are subjected to vibration stress. The machine has high strength and good rigidity, and the frame can maintain stability and deformation for a long time.

7. The main oil cylinder piston of the machine tool adopts aerospace technology - surface nickel phosphorus treatment, and its hardness can reach HRC60 or above. The guide sleeve that moves relative to the piston adopts a zinc based wear-resistant alloy with self lubrication, which can keep the oil cylinder in good working condition for a long time.

8. Adopting torsion axis synchronization and mechanical blocking, reliable, economical, and high-precision.

9. The upper mold is equipped with a winding compensation mechanism.

Operating procedures for digital hydraulic bending machine:

1. Strictly follow the operating procedures for machine tool workers and wear labor protection equipment according to regulations;

2. Before starting, it is necessary to carefully check whether the motor, switch, circuit, and grounding are normal and secure, and check that all operating parts and buttons of the equipment are stuck in the correct position;

3. Check the overlap and firmness of the upper and lower molds; Check whether each positioning device meets the requirements for processing;

4. When the skateboard and all positioning axes are not at the origin, run the return to origin program;

5. After the equipment is started, it should be idle for 1-2 minutes, and the skateboard should be fully moved 2-3 times. If any abnormal sound or malfunction is found, the vehicle should be stopped immediately, and the fault should be eliminated before it can work normally;

6. During work, one person should be in charge of unified command to ensure close cooperation between the operator and the feeding and pressing personnel, and to ensure that all cooperating personnel are in position before issuing the bending signal;

7. When bending the sheet metal, it must be compacted to prevent the sheet metal from lifting and injuring people during bending;

8. When adjusting the sheet metal pressing mold, the power must be cut off and the operation must be stopped before proceeding;

9. When changing the opening of the variable lower mold, no material is allowed to come into contact with the lower mold;

10. When the machine tool is working, no one is allowed to stand at the rear of the machine tool;