Inspection work of Qing storage machine:

When starting to use the Qing storage machine, it is necessary to check whether the machine cover is tight and secure, the blade wheel needs to be tightened, and it is used for flexible rotation. When operating, do not let your hands pass through the bag runway. In the non working environment of the Qing storage machine, the wear of the bearings will be more severe if it works continuously for 90 hours, and the bearings at both ends need to be replaced. When the disc type green storage machine is not in use, please roll the belt back to the belt reel in the storage compartment to avoid deformation during the next use. Do not replace parts on the machine at will and be sure to install warning signs. Do not remove them at will, as without warning signs, accidents may occur.

　　Integrated gearbox of disc type green storage machine:

Including main input shaft, transmission shaft, transmission shaft input wheel, transmission shaft driven wheel, connecting wheel, gearbox, disc input pulley, disc driven pulley; The output end of the main input shaft is equipped with a transmission shaft input wheel, which transmits external power to the transmission shaft input wheel. The transmission shaft passive wheel is connected to the transmission shaft input wheel through a chain, and is fixedly installed on the transmission shaft. The transmission shaft is set in the middle of two gearbox bodies, and connecting wheels are matched and installed at both ends of the transmission shaft, which are connected to the gearbox bodies on both sides; The disc input pulley is installed at the power output end of the gearbox, and the disc passive pulley is connected to the disc input pulley in coordination. This integrated gearbox can simplify transmission, reduce equipment failure rate, and improve production efficiency.

　　Advantages of using a green storage machine:

1. The front wheels are equipped with wheel side reducers, which have good sealing performance and will not wear out due to wind and sand. Stronger passability. Suitable for complex road surfaces.

2. Simple and compact structure, lightweight transmission, power saving, small turning radius, suitable for harvesting different sizes of land

3. Equipped with 20 sets of herringbone cutter rollers, the clearance between the moving and fixed blades is ensured, thereby ensuring consistent cutting and the quality of the chopped sections; All axles undergo dynamic balancing treatment to reduce vibration and extend the service life of bearings.

4. Equipped with reinforced wear-resistant blade secondary fans to increase the fan's conveying capacity, it can provide better conveying air volume for dry and light materials or wet and heavy materials, and prevent blockage;

5. Adopting a roller type grain crusher to ensure the quality of materials, the grain crushing rate reaches over 95%, meeting the feed standards of large-scale pastures; (Optional)

6. Equipped with a large grass box for easy recycling and harvesting on the ground; The projectile barrel moves in multiple sections, making it convenient to operate the grass box and collect on board;

7. Equipped with Weichai 210-270 horsepower engine, it has low fuel consumption and strong power;

8. The machine is equipped with a rotary cutting table, with a feeding inlet width of 600mm. The cutting table, pressure roller, and drum are all connected quickly for easy maintenance; Gear driven cutting platform saves power and is less prone to grass entanglement.

9. Optional Eaton (imported from the United States) static hydraulic drive for more flexible operation and higher efficiency; (Optional)

10. Optional 8-inch LCD screen, using dual-mode positioning of Beidou and GPS satellites, for real-time remote monitoring of the machine; The accuracy of equipment acre calculation is as high as 98%; Calculate acres while working, without the need for manual operation, improving work efficiency. Three cameras enable reverse imaging, blind spot imaging, and monitoring of grain storage; (Optional)

11. This machine can be equipped with a front rolling cutter cutting platform, which can collect the entire plant when it is lying down.

12. Optional four-wheel drive, stable handling performance, and strong passability.

13. Configure one key oil injection for the entire vehicle, saving time and effort. (Optional)

14. Equipped with electronic control and button based operation, convenient for the driver to operate. (Optional)

15. Configure anti spitting function, which can cause blockage due to sudden increase in feeding volume, without the need for manual material extraction, with one click automatic anti spitting. (Optional)

　　Please note:The green storage machines produced by enterprises all have a warranty certificate, which includes instructions on warranty maintenance and a warranty maintenance record form; Please specify the deadline for warranty repair and the contact address, phone number, etc. of the warranty repair unit. A comprehensive three guarantee service is an effective guarantee for product use, which can relieve users' worries.

　　moreCorn green storage machineInformation, please follow:http://www.xxltqcj.com/xinwenzhongxin.html