1. The system adopts a carbon steel spray coating cabinet integrated design (limited to models below 300L), and models above 300L are designed with SUS304 stainless steel frame welding, with exquisite appearance and effective space saving;

2. The system adopts fully automatic control and one click operation design;

3. The system has functions such as power on self-test, water shortage protection alarm, automatic power outage reset, automatic standby when the water tank is full, ultra-low pressure protection, automatic flushing of RO membrane, and regular sterilization;

4. The LCD backlit liquid crystal conductivity meter with an accuracy of 0.01 can detect and accurately display the water quality online at any time;

5. The built-in three-stage pre-treatment filtration system can effectively remove impurities and suspended particulate matter from raw water, reduce organic matter and residual chlorine pollutants in raw water;

6. The chassis is equipped with a 100L pure water tank (limited to models below 300L), while models above 300L are equipped with an external pure water tank to ensure maximum water usage during device operation;

7. The system is equipped with inlet and reverse osmosis operating pressure detection gauges, which can monitor the operating pressure of raw water and reverse osmosis membranes at any time.

8. Equipped with an independent delivery booster pump, the outlet pressure is designed to be 0.2-0.4Mpa, which can meet the water pressure requirements of disinfection and cleaning equipment;

9. The special pure water outlet docking method can be connected to the pure water inlet pipe of all plasma disinfection sterilizers.

1. Inlet water source: urban tap water, water temperature 1-45 ℃, water pressure 0.2-0.5Mpa, TDS＜300ppm；

2. Water production capacity: 150L/H, 250L/H, 500L/H (non-standard customization is available for orders exceeding 500L/H);

3. Produced water quality: conductivity ≤ 15 μ s/ cm@25 ℃, the water quality meets the specialized pure water standards for disinfection and cleaning in the hospital supply room;

4. Power supply: 220V/50Hz； Power: 1200W-2000W;

5. Host size: length x width x height (700mm x 820mm x 1560mm); Weight: 300kg

1. Raw water boosting system (optional when raw water pressure is insufficient, including raw water tank and delivery pump);

2. External water tank capacity and material can be selected from SUS304 stainless steel;

3. The optional PLC fully automatic Chinese LCD touch screen control system requires an additional cost of 2000 yuan.

4. The transportation and circulation pipelines will be measured according to the user's on-site requirements and charged based on actual costs.