Name: YK-3055 Needle Flame Tester

[Product Introduction]：

This product is used in electronic and electrical products to simulate the small flames generated inside the product under fault conditions, such as fault current flowing through the leakage path, overheating of components or parts, poor contact, etc., which may cause flames and then shoot onto nearby parts. This test uses simulation technology to evaluate the fire hazard. When the hot wire test or horizontal vertical combustion test method is not suitable for small parts (or components), the needle flame test method can be used. If the sample ignites during the hot wire test, the resulting combustion hazard still requires needle flame testing. Suitable for components and parts of electronic and electrical products, household appliances, such as terminal blocks, centrifugal switches, and rice cooker sockets.

[Execution standards]：

IEC884-1 "Standard Electrical Accessory Power Load Cabinet"

GB2099.1-2008 "plugs and sockets for household and similar purposes - Part 1: General requirements"

IEC335-91 "Safety of Household and Similar Electrical Appliances Part 1: General Requirements

GB4706.1-2005 "Safety of Household and Similar Electrical Appliances, Part 1 General Requirements"

GB5169.5-2008 "Fire hazard test for electrical and electronic products - Test flame - Needle flame test method"

UL1694 "Combustion Test Methods"

[technical parameter]：

Ø Box volume: ≥ 0.5 cubic meters, with glass observation door

Ø Fuel: Butane gas

Ø Burner specifications: length over 35mm, inner diameter Ø 0.5mm ± 0.1mm, outer diameter not exceeding Ø 0.9mm

Ø Flame height: 12mm ± 1mm adjustable

Ø Flame temperature: The time to rise from 100 ℃ to 700 ℃ is within 23.5 ± 1 seconds

Ø Temperature gauge: intelligent temperature controller with an accuracy of 0.1 ℃

Ø Timer: Imported timer is used, adjustable within the range of 0~99 minutes and 99 seconds, with an accuracy of ± 0.1 seconds. The combustion time can be set and the combustion duration can be recorded

Product features: The combustion chamber and main mechanical parts of this tester are made of stainless steel, with a beautiful appearance and resistance to smoke and gas corrosion. Time digital display, 3D adjustable fixture, automated control system, independent ventilation, easy observation and recording, stable and reliable.

Ø Power supply:AC220V / 50Hz