The double tube spiral cutter scale is a production measuring equipment that controls the feeding, dynamic measurement, and continuous conveying of powdered materials. The double tube spiral cutter scale is divided into single tube single-layer and double tube double-layer. The single tube single-layer completes both metering and conveying at the same time, while the double tube double-layer structure achieves stable flow and conveying in the upper layer, and metering and conveying in the lower layer. The stable flow effect is good and saves space. The length of the double tube spiral cutter scale can be determined by the actual situation; According to the user, a double tube structure is generally used for material measurement, which requires the installation of a screw conveyor and the simultaneous use of a screw scale to complete material measurement. It is mainly used for measuring powder materials or small particle materials.

Basic configuration of double tube spiral cutter scale:

① Scale frame (spiral feeder) ② Weighing screw machine ③ Weighing sensor ④ Frequency converter ⑤ Weighing controller ⑥ Control cabinet

Scope of application of double tube spiral cutter scale:

Widely used in the measurement of powder materials or small particle materials in industries such as power, metallurgy, coal, chemical, port, building materials, ceramics, etc. Commonly measured materials include fly ash, slag powder, raw material powder, coal powder, etc. in the cement industry.

Main parameters of double tube spiral cutter scale:

1. Measurement accuracy: 1.0 2.0 level

2. Control accuracy: better than 2%

3. Weighing range: 0~100t/h

4. Spiral speed: 40-85r/min

5. Spiral diameter: Φ 100~Φ 400

6. Power supply: Control system: single-phase 220V ± 10%, 50HZ

Power system: three-phase 380V ± 10%, 50HZ

Ordering instructions for double tube spiral cutter scale:

1. Material Name:

2. Measurement range: maximum ____ t/h; Minimum ____t/h; Commonly used ___t/h;

3. Spiral diameter: ____mm

4. Control accuracy:____

5. Material type: (1) Particle size (2) Specific gravity (3) Humidity

6. Centralized distance and number of centralized control units

7. Do you need a printer