VIP member
Drainage pipe external pressure load tester
The drainage pipe external pressure load tester is suitable for testing the compressive strength of various cement and concrete products. Mechanical p
Product details
The external pressure load tester for drainage pipes is suitable for testing the compressive strength of various cement and concrete products. Mechanical performance tests on upper and lower water pipes, pipe piles, and various rigid and non rigid materials. The instrument requires auxiliary equipment such as I-beams and can be customized!
1、 Usage method
1. Check if the sensors, display instruments, power lines, and signal lines are functioning properly.
2. Connect the AC three core power cord to the rear panel of the tester (power supply~220V), and connect the other end to the AC 220V three core socket of the mains.
3. Connect the 2-6m sensor five core signal wire to the instrument rear panel (signal input) five core connection.
4. The digital tube displays when powered on.
5. Before use: Power on the instrument and preheat it for about ten minutes. Wait for the numbers to stabilize before starting to work.
6. Place the sensor on the tested workpiece and secure it to prevent it from falling. The line of action of the measured object should coincide with the axis of the sensor to avoid measurement errors caused by lateral forces.
2、 Main technical parameters of the external pressure load measuring instrument for drainage pipes
1. Purpose: Suitable for pressure measurement up to 2000.0KN
2. Accuracy: ≤ 1%
3. Minimum unit of force display: 0.1KN
4. Power supply: AC 220V ± 5% (50Hz)
5. Zero adjustment: automatic
6. Environmental temperature for use:- 5℃ ~ +45℃
7. Operating environment humidity: 85% (relative humidity). There are no strong magnetic fields or noise sources in the surrounding area
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-