VIP member
Drip and Rain Test Device/IPX1, IPX2 Waterproof Test Equipment
Purpose: This device is mainly used to test the performance of products during storage, transportation, and use in rainy weather environments. It is m
Product details
Purpose:
This equipment is mainly used to test the performance of products during storage, transportation, and use in rainy weather environments. It is mainly used to test the physical and other related properties of electrical and electronic products, LED lamps, cabinets, electrical components, communication optoelectronics, mobile phones, cars, motorcycles, and their components under simulated rainy weather conditions. After testing, the performance of the product is evaluated to determine whether it meets the requirements, in order to provide design, improvement, evaluation, and factory inspection for the product.
IPX1Vertical drip test, place the sample in its normal working position on a sample table at 1 r/min, with the distance from the top of the sample to the drip port not exceeding 200mm. The drip rate is 1mm/min (+0.5mm/min). Drip duration of 10 minutes;
IPX2:Tilt the drip test at a 15 ° angle, so that one surface of the sample forms a 15 ° angle with the vertical line, and the distance from the top of the sample to the drip outlet is not greater than 200mm. After each surface is tested, switch to another surface for a total of four times. Drip rate 3mm/min (+0.5mm/min). The duration of dripping is 4 × 2.5 minutes (10 minutes in total).
Main parameters:
|
model
|
DL
|
|
Drip trough size (length x width x height mm)
|
1000*1000*100
|
|
Drip volume
|
1～5mm/min(＋0.5mm/min)
|
|
Drip aperture mm
|
Φ0.4
|
|
Drip hole distance mm
|
20×20
|
|
Drip area
|
1M²
|
|
Test bench size mm
|
500*500
|
|
Test bench angle
|
MAX: 15 °, adjustable
|
|
Test bench speed
|
1~10r/min
|
|
Drip trough height mm
|
200~2000,adjustable
|
|
water supply pressure
|
≥0.1Mpa
|
|
material
|
The water tank material is SUS304 stainless steel, the drip hole is made of copper material, the drip bracket and all other parts that come into contact with water are made of stainless steel material
|
|
Water tank lifting
|
Adopting asynchronous motor and screw lifting mechanism
|
|
Main Configuration
|
Electromagnetic valve, timer, booster pump, flow meter, filter, reducer, elevator
|
|
protective device
|
Leakage, phase loss, water shortage
|
|
Power supply (V)
|
220
|
|
Power (KW)
|
2
|
|
meet the standard
|
IEC60529,GB4208,DIN40050,GB2423.38,GB2424.23,ISO 20653
|
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-