The SDR716 drop ball impact testing machine is designed to measure the impact of finished products or components such as electronics, electrical appliances, household appliances, plastics, communication, etc. during installation and connection, in order to evaluate whether the product structure is defective or insufficient for testing. A steel ball of a certain specified weight is freely dropped from a certain height to strike the sample and component, and observe the degree of product damage.
Main technical parameters
Impact height range: 0-1500mm adjustable
Control method: Electromagnetic control drop, single impact.
Sample size: 50 X 120 X 60 X 120 X 80
Test height: can be freely set and adjusted to fall at a certain height
Control box: The separated electromagnet is installed from the bottom.
Volume: 500 * 400 * 1660mm
Power supply: 220V 50Hz
Weight specifications: 67G, 96G, 110G, 130G, 175G, 225G
Safety Precautions
This testing machine only uses single-phase 220V AC power supply;
Do not place flammable materials around the testing machine to avoid fire;
The test casing needs to be grounded, otherwise there is a risk of electric shock;
The power supply inlet should be connected to air with a certain amount or more of leakage protection; Switches and contactors are used to cut off power in case of emergency;
When the machine is working, do not use it to touch the electromagnet;
If you need to move the machine, you must cut off the power before moving it

