Main technical parameters

Range of impact height:0—1500mmadjustable

Control method: Electromagnetic control drop, single impact.

Positioning: Laser positioning, precise drop

Delay function: 0-60 second delay can be freely set

Sample size:50 X 120 X 60 60 X 120 X 80

Test height: can be freely set and adjusted to fall at a certain height

Control box: The separated electromagnet is installed from the bottom.

volume500*400*1660mm

power supply220V 50Hz

Weight specifications: 55G, 64G, 132G, 176G, 225G (customizable steel balls of any weight)

The drop ball impact testing machine SDR718 is designed to test finished products or components such as glass, plastic, plastic materials, and product shells that encounter collisions during installation and connection, in order to evaluate whether the product structure is defective or insufficient for testing. A steel ball of a certain specified weight is freely dropped from a certain height to strike the test sample and component, in order to observe the degree of product damage.

Safety Precautions

This testing machine only uses single-phase220VAC power supply;

Do not place flammable materials around the testing machine to avoid fire;

The test casing needs to be grounded, otherwise there is a risk of electric shock;

The power supply inlet should be connected to air with a certain amount or more of leakage protection; Switches and contactors are used to cut off power in case of emergency;

When the machine is working, do not use it to touch the electromagnet;

If you need to move the machine, you must cut off the power before moving it.

Maintenance Instructions

After each use of the equipment, cleaning work should be done inside and outside the equipment;

Regular attention should be paid to anti-corrosion measures for the spray coating of equipment to prevent corrosion, and anti rust oil should be used on the outer surface of the equipment；

The testing machine should be used regularly for a long timeInMachine transmission partsaddAdd lubricating oil,

Please do not disassemble or assemble electrical components and equipment parts at will, in order to avoid damaging the electrical control circuit and causing equipment malfunction that affects its performance;

When storing and using equipment, there should be no flammable, explosive, or corrosive substances around;

Please have a dedicated person operate, use, and maintain the precision instruments of this machine;