Material Description:

The full name of aramid fiber is' poly (p-phenylenediamine) ', also known as Aramid fiber (DuPont's trade name is Kevlar). It is a new type of high-tech synthetic fiber with excellent properties such as ultra-high strength, high modulus, high temperature resistance, acid and alkali resistance, and light weight. Its strength is 5-6 times that of steel wire, modulus is 2-3 times that of steel wire or glass fiber, toughness is 2 times that of steel wire, and weight is only about 1/5 of steel wire. At a temperature of 560 degrees, it does not decompose or melt. It has good insulation and anti-aging performance, and has a long life cycle. The discovery of aramid is considered a very important historical process in the materials industry.

summary:
The XSG series rotary flash dryer is a drying equipment developed by our factory based on the introduction and absorption of foreign technology. The machine has a reasonable design, compact structure, wide applicability, high production capacity, good product quality, high efficiency, energy saving, and can complete drying, crushing, and screening in one device at a time, eliminating environmental pollution.

Principle:
Hot air enters the mixing and crushing drying chamber from the bottom of the dryer at a suitable spraying speed through the inlet pipe, generating strong shear, blowing, and rotating effects on the material. As a result, the material is subjected to centrifugation, shear, collision, and friction, leading to particle reduction and enhanced mass and heat transfer. At the bottom of the dryer, larger and wetter particle clusters are mechanically crushed by the agitator, while particles with lower moisture content and smaller particle size are carried up by the rotating airflow and further dried during the upward process. Due to the rotating flow of gas-solid phases, the inertia of the solid phase is greater than that of the gas phase, and the relative velocity between the solid and gas phases is higher, which enhances the mass and heat transfer between the two phases. Therefore, the production intensity of this machine is high.

characteristic:
Multiple feeding devices are available for selection, ensuring continuous and stable feeding without bridging during the process.
A special cooling device is installed at the bottom of the dryer to avoid material deterioration in the high-temperature zone at the bottom.
Special pneumatic sealing device and bearing cooling device effectively extend the service life of the transmission part.
The special air distribution device reduces equipment resistance and effectively provides the processing air volume of the dryer.
The drying chamber is equipped with grading rings and swirl blades, and the material fineness and final moisture content can be adjusted. (If the final moisture content of calcium carbonate can be adjusted to ≤ 0.1%)
Compared to other drying methods, it can effectively increase the specific gravity of materials.
The drying chamber has a high circumferential gas velocity and short material residence time, effectively preventing material sticking to the wall and thermal sensitive material deterioration, achieving high efficiency, speed, small equipment, and large production.

Explanation: In order to prevent improper competition, detailed technical information cannot be disclosed. Please call for consultation. This device can be customized non-standard,We are one familySpecializing in drying equipmentofEnterprises engaged in research, development, design, and manufacturing have rich experience in non-standard production. Our company has prototypes available all year round, and you can bring materials to test them,weSincerely cooperate with new and old customers at home and abroad, and create brilliance together in the new century!