AT-610 has been discontinued, alternative model: AT-710M
Automatic potentiometric titrator AT-710M

Dual channel automatic potentiometric titrator AT-610

The main features of the dual channel automatic potentiometric titrator AT-610 are:

1. It can connect two measuring units simultaneously and perform measurement functions simultaneously.
2. The automatic potentiometric titrator screen adopts an eight inch color LCD display.
3. The screen displays the titration curve in real-time, and both system potentials are recorded simultaneously.
4. Adopting a touch screen design, input and control can be directly performed on the touch screen.
5. The touch unit and the fully automatic titration measurement unit can be set separately.
6. The automatic titrator can use a miniature memory card (CF) to store data.
7. Potentiometric titrator, fully compliant with GLP/GMP specifications.
8. The temperature is measured using a platinum thermometer resistor (Pt100).

Technical parameters of dual channel automatic potentiometric titrator AT-610:

Detection range: Potential:- 2000.0～+2000.0mV， pH: 0.00～14.00pH， Temperature: 0-100.0 ° C.
Precision of automatic burette: 20mL: ± 0.02mL, repeatability: ± 0.01mL (standard accessory).
50mL, 10mL, 5mL, and 1mL burettes are available for purchase.
Resolution of burette: 1/20000.
Titration modes: blank/automatic/automatic intermittent/constant rate/petroleum neutralization value/COD/constant pH control, a total of 7 types.
Titration method: 50 standard methods, 10 composite methods (up to 5 methods can be connected).
Titration types: potentiometric titration (neutralization, oxidation-reduction, precipitation), photometric titration, polarization titration, and conductivity titration.
Titration type: total amount/automatic endpoint/set endpoint/automatic crossover point/automatic endpoint and set endpoint/learning titration.
Keyboard operation: Touch screen direct operation control.
Display function: Eight inch color LCD display, 256 colors, 800 × 600 pixels.
Channel switching: Two channels can be switched for display (when connected to a Karl Fischer moisture analyzer, the display can also be switched).
Calculation function: concentration calculation, statistical calculation processing (mean, standard deviation, relative standard deviation).
Automatic titrator: It can control up to 10 automatic titrators (including 1 built-in in the host).
Measurement unit: Automatic potentiometric titrator (AT-610), volumetric Karl Fischer moisture analyzer (MKA-610), coulombic Karl Fischer moisture analyzer (MKC-610), and multi sample automatic sampler (CHA-600) can be added.
Usage environment: Temperature: 5-35 ° C, relative humidity: Below 85% RH.
Power Supply: Control Unit (MCU-610)/Automatic Titration Unit (AT-610)/Printer (IDP-100): 100-120/200-240V ± 10%, 50Hz/60Hz, approximately 20W/25W/7W.
Weight: Control unit (MCU-610): About 2.0kg, titration unit (AT-610): About 4.0kg, mixing unit (MS-610): About 2.0kg, printer (IDP-100): About 0.4kg.