Dual function water bath constant temperature oscillatorIntroduction:

Dual function water bath constant temperature oscillatoralso known asDual function water bath constant temperature shakerIt is a biochemical instrument that combines a temperature controlled constant temperature water bath and an oscillator. This series of products adopts a microcomputer temperature control system, with high temperature control accuracy, convenient temperature adjustment, accurate and intuitive display values, and superior and reliable performance.

Dual function water bath constant temperature oscillatorTechnical parameters:

Dual function water bath constant temperature oscillatorcharacteristic:

1. Temperature control range: room temperature -100 degrees.

2. Temperature control method: Adopting microcomputer temperature control, precise temperature control, no overheating or overshoot phenomenon.

3. Oscillation mode: spiral.

4. Inner liner material: high-quality stainless steel, universal spring clamp, and different clamps can also be designed according to requirements.

5. Shell material: Made of high-quality cold plate, surface electrostatic spraying, rust prevention, and extended service life.

6. Motor type: Permanent magnet DC motor, small size, high power, long service life, and also has the characteristics of low noise.

7. Speed regulation method: stepless speed regulation.

8. Timing range: 0-9999 minutes or normally open.

Note: After each use, attention should be paid to cleaning in a timely manner to extend the service life.

Dual function water bath constant temperature oscillator

1. Please read this manual carefully before use.
2. The working surface of the machine should not be excessively smooth (such as tiles, etc.).
3. The electrical rated parameters of the socket provided by the user should not be less than the electrical rated parameters of the machine, and there should be good grounding measures.
4. The whole machine is strictly prohibited from being used in an environment with direct sunlight.
5. The speed control should start slowly from low speed to high speed.
6. The machine may experience some displacement during high-speed oscillation, so it should be monitored by someone during use.

Dual function water bath constant temperature oscillatorinstructions:

1. Add an appropriate amount of water to the water tank (the water level should be 2-3cm above the spring clamp) and place the reagent bottle on the spring clamp.

2. Firstly, turn on the power, turn on the heating switch, and the temperature controller will light up. At this time, click the SET function button on the temperature controller. Click the set function button on the temperature controller, and the upper row will display sp and the lower row will display the set temperature. Click the △ or ▽ button to select the desired working temperature. After setting, click the set function button again to enter the constant temperature timing setting. The upper row will display st and the lower row will display the set time. Click the ▲ or ▼ button to select the constant temperature timing time. (If no timing is required, set the time to 0) Click the set button again to exit the setting state. At this time, the temperature inside the box is running at a constant temperature according to the set temperature; After running, the buzzer will sound an alarm and stop heating.

3. Adjust the oscillation 'timing knob', select the oscillation timing time (if timing is not required, adjust the timing knob to the normally open position), and then slowly adjust the 'speed control knob' to the desired oscillation speed.

4. After use, adjust the speed control knob to the 0 position, turn off the power. If not in use for a long time, unplug the power, drain the water, clean and wipe it clean in a timely manner to extend its service life.

Dual function water bath constant temperature oscillatorprecautions

1. The power socket provided by the user should have good grounding measures.
2. It is strictly prohibited to move the machine during normal operation.
3. It is strictly prohibited for objects to collide with the machine.
4. Children are strictly prohibited from approaching the machine to prevent accidents.
5. Before replacing the fuse, ensure that the power supply has been cut off.
Note: Special specifications can be customized. The product comes with a one-year free warranty and lifetime maintenance from the date of manufacture.