Dual system constant temperature and humidity test chamber
The Balanced Temperature and Humidity Control System (BTHC) controls SSR in a P.I.D. manner, ensuring that the heating and humidification capacity of the system is equal to the heat and humidity loss, thus enabling long-term stable use.
Technical Parameter
| Inner box size | W500X H600X D500(mm) |
| Temperature range | -20℃ ~ +150℃ |
| Humidity range | 20% RH ~98% RH |
| Control stability | Temperature ± 0.5 ℃ Humidity ± 2% |
| Uniformity of distribution | Temperature ± 2.0 ℃ Humidity ± 3.0% |
| Heating rate | Nonlinear no-load at 3 ℃/min |
| Cooling rate | Nonlinear no-load at 1 ℃/min |
| Temperature limit | Zui high temperature+150℃ Zui Low Temperature-20℃ |
| Inner box material | stainless steel |
| Outer box material | stainless steel |
| Insulation material | Hard Polyurethane foam+glass wool |
| Tightly pressed | Silicone foam tightening 1 strip |
| Storage rack | There are 2 stainless steel storage racks with adjustable height inside the box |
| Heater | Stainless steel fin type heat sink U-shaped heating tube imported from Taiwan, China |
| Humidifier | Design of Split Type Humidifier Cylinder |
| Wind turbine | 1 motor Stainless steel extended axis Multi blade aluminum alloy wind turbine (SIROCCO FAN) Special adjustable louver air circulation system |
| Box door | Single door, double layered door, embedded non reactive flat handle Three layer vacuum tempered glass enlarged window Electric heating automatic defogging, imported "PHILIP" lighting tube |
| Humidity system | One 15L stainless steel water tank is hidden inside One automatic water supply pump (automatically delivering water from the lower water tank to the upper water tank) Water recovery device Water shortage alarm device |
