- EPE bus (compatible with PICMG1.3 bus standard) standard full-length card EPE-1815
-
EPE bus (compatible with PICMG1.3 bus)Standard full-length cardEPE-1815
summary:
EPE-1815 is based on Intel ® H61/B65/Q67chipsetDeveloped standard full-length cards that comply with the EPE bus specification (compatible with the PICMG1.3 bus standard); Supports mainstream Ivy Bridge/Andy Bridge LGA1155 dual core/quad core i3/i5/i7 processors on the Intel market Intel ® Pentium ® Or Celeron ® G-series processors; Supports two DDR3 memory modules of 800/1066M/1333M, with a maximum support of 16GB; The EPE reinforced bus makes the reliability of this full-length card stronger than the traditional PICMG1.3 gold finger connected full-length card, with the characteristics of optimal cost-effectiveness and long supply cycle. It can be widely used in automation control, automation detection, petrochemicals, intelligent transportation, safety monitoringmachine visionIn other fields.
Product specifications:
processor | Support LGA1155 package Intel ® Core ™ Ivy Bridge/Sandy Bridge processor, supporting FSB bus frequency of 800/1066/1333MHz |
chipset | Intel ® H61/B65/Q67 |
Memory | Provide 2 240Pin DDR3 1066/1333 memory slots, supporting Un buffered Non ECC memory and dual channel functionality; The maximum capacity of a single memory slot is 8GB, and it supports a maximum memory capacity of 16GB |
display interface | Supports VGA and DVI single display, VGA+DVI dual display, with DVI optional. DVI supports hot swappable function and supports copying or expanding output; VGA supports a maximum of 2048 x 1536@75Hz , 3 bit color depth, DVI supports up to 1920 × 1200@60Hz |
audio | 1 HDA audio interface, supporting Mic in/Line in/Line out |
LAN | 2 10/100/1000Mbps network interfaces, LAN1 supports network wake-up, with 1 optional |
storage | H61 supports 4 SATA 2.0 interfaces and hot swappable functionality |
B65 supports 1 SATA 3.0 interface and 5 SATA 2.0 interfaces (2 of which can be expanded through the motherboard), and supports hot swapping function | |
Q67 supports 2 SATA 3.0 interfaces and 4 SATA 2.0 interfaces (2 of which can be expanded through the motherboard), supports RAID 0, 1, 5, and 10, and supports hot swapping function | |
One of the SATA connectors supports installing DOM disks with SATA interfaces | |
I/O interface | Two serial ports, among which COM1 supports wake-up function and supports RS-232/RS-422/RS-485 mode selection; Simultaneously supporting LPC extension with 4 serial ports |
10 USB 2.0 ports (H61 and B65), 14 USB 2.0 ports (Q67), of which 4 are led out through the motherboard; Two USB 3.0 ports are optional (only applicable to configurations with only one network port on the motherboard), with all pin interfaces. | |
1 PS/2 keyboard/mouse interface | |
1 8-bit digital I/O interface | |
Expansion Bus | Adopting the EPE bus standard, supporting 1 PCIE × 16, 4 PCIE × 1 or 1 PCIE × 4, 4 USB, 2 SATA I2C、 4 PCI masters and provide LPC (Low Pin Count) extension |
work environment | 0℃~60℃; 5% to 90% (non condensing state) |
Environment | -20 ℃~80 ℃, 5%~90% (non condensing state) |
watchdog | 255 level, programmable seconds/minute, timeout interrupt or system reset |
power supply | Using ATX power supply, supporting ACPIS0/S1/S4/S5 |
Size (W × D) | 338.6 mm×129.7 mm |
Main features:
◆ Supports LGA1155 packaged Ivy Bridge/Andy Bridge processors Pentium ® Or Celeron ®G-series processor
◆ Adopting Intel ® H61/B65/Q67chipset
◆ Supports two DDR3 memory modules of 800/1066M/1333M, with a maximum support of 16GB
◆ Supports up to 2 10/100/1000M adaptive network adapters
10 USB 2.0 ports (H61 and B65), 14 USB 2.0 ports (Q67)
◆ 2 USB 3.0 optional (only for configurations with only 1 network port on the motherboard), all pin interfaces
◆ 2 serial ports, 1 parallel port, 1 PS/2 interface, 1 8-channel digital I/O
◆ The onboard reserved LPC expansion interface can install DOM disks with SATA interfaces