VIP member
Efficient fine sand making machine
XY roller press counterattack composite high-efficiency fine crushing sand making machine cement packaging machine Product introduction: Leading techn
Product details
XYRoll press counterattack composite high-efficiency fine crushing sand making machine
Cement packaging machineProduct Introduction:
Leading technology sets us apart from others. For several years, this machine has been used in the cement industry to crush cement clinker and limestone, with excellent results.
This machine is more suitable for finely crushing basalt, dolomite, limestone, iron ore, copper ore, sandstone, gypsum, and coal gangue into different specifications of finished products. The advantage is incomparable to any current sand making machine!
1High crushing rate and sand formation rate98%above
Due to the use of roller press and impact crushing method, the shortcomings of other sand making machines relying on impact crushing and the inability to guarantee material fineness in stone crushing method have been overcome. make95%The above materials are all referred to as<5㎜, average<3㎜.Most of them are0.8㎜Powder material.
2 Structural science is practical and has low operating costs.
Due to the use of unique roller pressing for fine crushing. Adopting a new type of polymer wear-resistant material, the operating cost is extremely low, and the consumption of wear-resistant materials in sand production is generally0.20~0.30yuan/About tons, which cannot be compared with domestic and foreign sand making machines.
3Low maintenance volume
The structure is very reasonable. retain2A large openable maintenance door is used for replacing the main lining plate and removing debris. Extremely simple and convenient to use and maintain.
4High environmental performance and low noise.
There is almost no flying dust during use, and the noise generally does not exceed75Decibel（olbGrade).
5Less affected by the moisture content of the material, the moisture content can reach up to10%左右。
XYWorking principle of roller press counterattack composite high-efficiency fine crushing sand making machine
1Materials enter from top to bottom1480turn/Inside the high-speed rotating material separation rotor, the material is separated at a rate of per second65At a speed of about meters, it is thrown onto the counterattacking lining plate and shattered. After the materials collide with each other, they are repeatedly rubbed and broken under the impact of the impact plate.
2After being crushed by counterattack, the material enters the gap between the two rollers of the roller press from top to bottom5mm）The material is rolled and finely crushed5mmfollowing,98%The above is finely divided into3mmThe following materials.
3 The finished sand is cubic, polygonal, with a high packing density and a large amount of powder (which can partially replace cement), which can significantly reduce the amount of cement used in cement concrete and greatly reduce the cost of industrial sand.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-