Structural features:

1. The mixed or refined materials are fed into the silo, and a pill with the same diameter is produced under the extrusion of the screw propeller. It is then placed in the middle of the pill making mold and quickly compared to make a pill of uniform size.

2. This machine can quickly replace the rollers to produce pills of different scales.

3. This machine has the function of mixing ingredients to ensure consistent efficacy of the pills.

4. Lightweight and stable performance.

5. Easy to operate.

6. Low noise.

7. Beautiful appearance

Technical parameters:

type number:GX-60

1. Function: Can produce water pills, honey pills, and pill shaped foods.

2. Pill specification: 6mm (optional 4, 5, 6, 7, 8, 9, 10)

3. Productivity: 5-15 kg/hour

4. Motor power: 400W, working speed 65 revolutions per minute

5. Dimensions: 400 × 380 × 400mm

6. Weight: 45kg

Structural features:

1. Send the mixed or refined medicinal materials into the silo, and under the extrusion of the screw propeller, make a medicinal strip with the same diameter. After being put into the pill making group, it is quickly compared to make pills of uniform size.

2. This machine can quickly replace the rollers to produce pills of different specifications.

3. The machine has a mixing function with the medicine to ensure consistency in the properties of the pills

4. Lightweight and stable performance.

5. Easy to operate.

6. Low noise.

7. Beautiful appearance.

Operating instructions:

Process flow: Preparation of materialsPill making block, pill making strip, pill making

Before starting up, add oil to each oil hole, clean the rollers and areas in contact with the medication, and perform degreasing and disinfection treatmentAfter processing, the medicine is dried and crushed into fine powder, which is then sieved through an 80-100 mesh sieve.

3. According to the properties of the medicine powder in the prescription, refine it into a suitable adhesive.

4. Making pill blocks, also known as medicinal herbs, involves mixing the powder with a binder and placing it into the feeding port of the machine. The discharging port is replaced with the medicinal herb discharging port, and this process is repeated multiple times. After the medicine is mixed, it becomes non stick and consistent in hardness and softness.

5. Pill making: Replace the discharge port corresponding to the roller, and place the finished medicine strips horizontally into the pill making group to knead them into pills.

6. Drying: Put it into the coating machine, turn on the heating power and the coating machine to dry it

After use, remove the discharge port, exit the screw, and clean the inside of the machine.

8. After use, remove the roller according to the diagram for precision washing, install and put it back in place.

9. Apply a small amount of grease on the surface of rollers, rollers, screws, etc.

10. Keep the surface of the equipment clean and dry.