Electric soil sampling drilling rig model: HAD-H508

1、 Product Introduction:

HAD-H508The electric soil sampling drilling rig is a lightweight soil sampler designed based on the reference of large hydraulic, gasoline, and pneumatic drilling rigs. Even inexperienced drilling personnel can operate with simple training. The sampling process is simple and straightforward,1arrive2Individuals can complete the operation of the device. The entire drilling process does not require adding water, ensuring the quality of the sample obtained (no pollution, no disturbance).

Compared with conventional large drilling rigs,HAD-H508The electric soil sampling drilling rig is more convenient to carry and easier to operate, and non professionals can easily complete the operation of the equipment. In some areas where depth requirements are not high（10Using this equipment is a good choice for project sites with complex terrain and difficult access for large equipment.

Compared to traditional hand drills,HAD-H508The electric soil sampling rig has a deeper sampling depth, higher sampling efficiency, and obtains soil samples in their original state, with minimal disturbance and compression (depending on the terrain). In projects with sampling depths exceeding half a meter and high requirements for soil sample quality (undisturbed, non compressed), using this equipment is a good choice.

2、 Detailed parameters:

1Electric host:

Voltage:220V

Power:3.6KW

Ignition method: switch type

Energy consumption: low energy consumption

Number of impacts:2600/M

Impact energy:60J~79J

Core depth:0-10M

Host weight:22KG

2Standard sampling drill rod not less than2Rice, drill rods can be moderately increased according to actual work needs;

3Sampling depth, can be connected to a drill rod for one-time sampling without lifting the drill midway;

4Drill rod: inner and outer diameters not less than38mm/50mmThe length shall not be less than1.00rice/Root, using threaded connection, easy to assemble and disassemble;

5Drill bit: Take hard soil drill bit, take standard soil drill bit each1individual;

6Sample tube: inner and outer diameters not less than34mm/35mmThe length shall not be less than1.00rice/Root; Equipped with gaskets;

7Pulling device: quick pulling, speed not less than3.00rice/Minutes, adopting a more reasonable ergonomic design, can be pressed by hand or stepped on by foot;

8The instrument is a portable on-site sampling device suitable for vehicles.

3、 Standard configuration

1Electric host 1tower

2Standard soil drill bits and hard soil drill bits can be freely selected and matched

3、1Rice drill pipe2root

4Auxiliary extraction device 1cover

5Plastic sleeve, length1Meter, inner diameter35mm, supporting related gaskets and accessories

6Industrial plastic transport boxes one

7Scraper, rubber hammer, pliers, headphones5MTape measure, gloves, cleaning brush, etc1individual

8Product manual

9Product Qualification Certificate

10Instrument Warranty Card

4、 Application direction:

1Agriculture/Forestry soil investigation

2Environmental Soil Investigation

3Geotechnical Engineering Investigation

4Groundwater investigation

5Coastal geological survey

6Wetland environmental investigation

7Investigation of tailings pond and storage yard

8Archaeological investigation