Gamry's eQCM 10M ™ It is an electrochemical quartz crystal microbalance (EQCM) used for rapid impedance scanning. For anyone studying interface processes, EQCM is one of the most valuable tools in their toolbox. Corrosion, ion embedding, ion adsorption, polymer growth, and sensor binding events are all interface processes that cause mass changes. These quality changes can be measured by monitoring the resonance frequency of oscillating quartz crystals.

The eQCM 10M is a universal instrument that can accommodate any crystal with a frequency range of 1-10 MHz in any pool or bracket. Its resolution can detect ng/cm²Quality changes at a certain level. This is even lighter than a single layer of material! We also provide all the materials you need with the system - eQCM 10M Teflon ® Electrochemical cell, 10 MHz gold coated crystal (5x), cable, manual, and software.

characteristic

• Any crystal within 1-10 MHz in any pool
• Detecting ng/cm2
• USB interface
• Integrated QCM and Gamry potentiostat acquisition
• Impedance scanning hassAndp, namely series resonance and parallel resonance frequencies
• Flexible and customizable Echem Analyst at Gamry ™ Conduct data analysis in the middle

application

• Electroactive polymer
• Li+embedding
• Corrosion research
• Electrodeposition
• Self assembling single-layer
• Antigen antibody interaction
• Surface active agent adsorption
• Protein adsorption
• Ionic and solvent transport

The eQCM 10M rapidly scans the frequency window around two resonant frequencies (for explanations of these resonant frequencies, please refer to the eQCM Basic Knowledge Application Note). The advantage of scanning through two resonant frequencies is that you no longer need to cancel parasitic capacitance to maintain oscillation. In addition, the relevant impedance spectrum is displayed every time a data point is obtained, allowing you to gain a deeper understanding of the formation of bubbles on the electrode or incorrect pool settings. Having two resonant frequencies enables you to perform basic dissipation monitoring. When_sAnd_pWhen responding similarly, the membrane is already relatively hard, and when_sAnd_pWhen the response is different, the membrane has not hardened yet.

You can use a resonator to adjust the driving amplitude of the crystal. When working in ionic liquids (ILs) or viscous solutions with particularly high damping, this is very important. The ability to manually increase the driving amplitude of high load crystals has significant advantages over direct dissipation or time-resolved techniques.

Data analysis in our flexible and customizable Echem Analyst ™ Completed in the middle. We provide you with various drawing options, allowing you to display data in the way you need. You can draw graphs of direct mass change versus time, mass versus charge, mass versus potential, or basic form dissipation versus time.

Other attachments of QCM include:

• 10 MHz Pt coated crystal
• 10 MHz C coated crystal
• 10 MHz Fe coated crystal
• 10 MHz blank crystal (with Au/Ti layer on one side)

• EQCM flow cell and Ag/AgCl reference electrode

  Specifications

  All specifications are subject to change without prior notice.

  frequency measurement

  Range	1– 10	MHz
  resolving power	0.02	Hz

  environment

  Operating temperature range		0 to 45	°C
  relative humidity	high	90 (non condensing)	%
  Storage and transportation temperature		-25 to 75	°C
  Large transportation acceleration		30	G

  routine

  Power input voltage	Range	10 to 14	Fu
  Power Supply	high	25	W
  size	large	175 x 115 x 80	mm
  weight	high	1	kg
  External power adapter size	large	120 x 55 x 30	mm
  Weight of external power adapter	high	400	gram

  The resonator control Gamry potentiostat requires a PHE200 license.

  system requirements

  • USB 2.0 port
  • Microsoft ® Windows ™ XP SP3/Vista/7 (32-bit or 64 bit)