Product Introduction

PRODUCT BRIEF

This electromechanical synchronous sensor can be widely used in ordinary wet water meters without changing the structure of traditional wet water meters, and without affecting the measurement accuracy and sensitivity of traditional wet water meters,waterAfter the calibration cycle of the meter expires

Just replace the water meter base meter; Using a decimal code diskDecoding technology can more accurately read the mechanical position data of the code disk, which is non-traditional photoelectric readingwater intakingTable wheel position data, there is no wheel 0 and

There is no critical state or fuzzy state in the 9-bit problem, and electronic components are installed inindependentFully sealed chamber, waterproof performance reaches IP68 level, no light drying

Disturbing the problem, the production process is extremely simple and more suitable for large-scale and standardized production.

Product Features

Product features

Decimal code decoding technology, there is no carry problem between 0 and 9

Wordless wheel display, not affected by external light interference, more accurate readings, measuring accuracy up to 0.1m3

Fully sealed structure, not affected by external humid environment, waterproof performance reaches IP68 level

Split design makes installation and maintenance simpler and more convenient

After the calibration cycle of the water meter expires, only the base meter of the water meter needs to be replaced

Technical Parameter

TECHNICAL PARAMETER

Dimensions: 116 * 90 * 67.7mm

Communication method: M-BUS bus

Communication speed: 1200BPS/2400BPS/4800BPS/9600BPS

Working voltage: DC36V

Bus pin ESD protection exceeds 10KV

Working current: Static current ≤ 1.4MA

Working current: ≤ 10MA

Working environment: Temperature: -5 ℃~80 ℃ Humidity: 0%~95% RH

Communication transmission distance: 300M