VIP member
Electronic component gas capture device
Electronic component gas capture device
Product details
Product Introduction
Effectively capture volatile components generated by electronic components!
Electronic component gas capture device HM-04 Ⅱ
characteristic:
Used to capture gases generated by electronic components into a primary adsorption tube.
Equipped with 4 sampling rooms, controlled by independent control valves to blow air, for independent capture sampling without interference, ensuring reliable analysis data.
The volatile components obtained after blowing are captured by a PAT (primary adsorption tube) filled with Tenax on HM-04 Ⅱ. In addition, a timer can be used to set the blowing time (maximum value is 99 hours and 59 minutes).
*It can be set to close the PAT (primary adsorption tube) with an electromagnetic valve after the specified blowing time to prevent the leakage of attached components.
Electronic component gas capture device HM-04 Ⅱ
characteristic:
Used to capture gases generated by electronic components into a primary adsorption tube.
Equipped with 4 sampling rooms, controlled by independent control valves to blow air, for independent capture sampling without interference, ensuring reliable analysis data.
The volatile components obtained after blowing are captured by a PAT (primary adsorption tube) filled with Tenax on HM-04 Ⅱ. In addition, a timer can be used to set the blowing time (maximum value is 99 hours and 59 minutes).
*It can be set to close the PAT (primary adsorption tube) with an electromagnetic valve after the specified blowing time to prevent the leakage of attached components.
Technical Parameter
| Number of sample tubes | 4 of them |
| Sample tube material | Stainless steel (inner surface gold-plated) |
| Sample tube size | φ60×56 mm（160 ml） |
| Heating furnace material | aluminum |
| Heating method of heating furnace | resistance heating |
| Heating furnace heating temperature | Room temperature~200 ℃ |
| Type of blowing air | Commonly used helium or carbon dioxide |
| Purge gas flow rate | 20～200 ml/min |
| Size of sample heating device | 285(W)×310(D)×225(H)mm |
| Weight of sample heating device | 21.5 Kg |
| CONTROLLER SIZE | 320(W)×320(D)×215(H)mm |
| Weight of controller | 11 Kg |
| power supply | 100 V/10 A |
*Optional water-cooled circulation device
*Optional adapter to use capture sampling tubes produced by other companies for sampling
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-