VIP member
Explosion proof high and low temperature damp heat test chamber
Explosion proof high and low temperature wet heat test chamber is used to simulate climate environment tests such as temperature, humidity, and wet he
Product details
Details introduction:
Explosion proof high and low temperature damp heat test chamberUsed for simulating climate environment tests such as temperature, humidity, and wet hot alternation, and for reliability testing of different types of batteries, individual cells, module modules, etc. Suitable for scientific research laboratories, quality testing laboratories, or production workshops. It is also widely used in industries such as aerospace, aviation, electronics, automobiles, batteries, etc. for reliability testing and durability testing of electronic and electrical products, materials, components, equipment, etc.
Explosion proof high and low temperature damp heat test chamberProduct Specifications：
SFB-E225-CE CE stands for0℃ / CR stands for -20 ℃/CL stands for -40 ℃/CS stands for -70 ℃
|
model |
SFB-E225 |
SFB-E408 |
SFB-E800 |
SFB-E1000 |
||
|
studio dimensions (W x D x H cm) |
50×60×75 |
60×80×85 |
100×80×100 |
100×100×100 |
||
|
outer box dimensions (W x D x H cm) |
75×175×175 |
85×185×185 |
125×185×210 |
125×205×210 |
||
|
sex can |
temperature range |
0℃/-20℃/-40℃/-70℃～+100℃/+150℃/+180℃ |
||||
|
Temperature Uniformity |
≤2℃ |
|||||
|
temperature deviation |
±2℃ |
|||||
|
temperature fluctuation |
≤±0.5℃,pressGB/T5170-1996express |
|||||
|
heating and cooling rate |
warm up3℃/minCooling down 1℃/min |
|||||
|
humidity range |
10～98%RH |
|||||
|
humidity deviation |
±3%(＞75%RH), ±5%(≤75%H) |
|||||
|
Temperature Controller |
Chinese color touch screen+PLC controller(SETH/Control Software) |
|||||
|
Equipment operation mode |
Fixed value operation, program operation |
|||||
|
refrigeration system |
refrigeration compressor |
Imported fully enclosed compressor |
||||
|
cooling method |
Air cooling (optional water cooling) |
|||||
|
Humidification water |
Distilled water or deionized water |
|||||
|
protective measures |
Leakage, short circuit, overheating, water shortage, motor overheating, compressor overpressure, overload, overcurrent Explosion proof, pressure relief, smoke exhaust, fire extinguishing devices, etc |
|||||
|
standard device |
Sample shelf(two sets)Observation window, lighting fixture, cable hole（Ø50One), caster wheels |
|||||
|
power supply |
AC380V 50Hzthree-phase four-wire+ground wire |
|||||
Features of the equipment
●Color screen 32-bit control system E-Ethernet E-management, USB data access function
●Programmable load power supply with 4-channel ON/OFF output control to protect the device under test
●Design a unique air circulation system to provide precision for the test sample
●Environmentally friendly refrigerant flow control, energy-saving and fast temperature rise and fall rate
●The anti condensation function and over temperature of the independent test sample No wind Smoke protection function
●Unique operating mode, the test box returns to room temperature after the end of the experiment to protect the test object
●Scalable network video surveillance, synchronized with data testing
●Control system maintenance automatic reminder and fault case software design function
●Industry's long-term low-temperature operation without frost function
●Explosion proof design of box body (explosion-proof chain of box door, explosion-proof window) effective protection test
●Equipped with automatic water supply system, pure water filtration system, and water shortage warning function
Standard Configuration
●2 silicone plugs for lead holes●One 50mm lead hole on each side
●Two stainless steel sample racks●One 20L water storage tank
●One set of fire extinguishing device
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-