Automatic Adjacent Surface Labeling Machine

Classic case

Basic purpose

Specially designed for corner labeling of boxes, it can be applied to the top, bottom, and side corners of the box to prevent disassembly. Mainly used for anti tamper labeling of poker and electronic product packaging boxes.

Product Features

◆Specially designed for corner labeling of boxes, achieving corner labeling on the top, bottom, and sides of the box to prevent disassembly;

◆High speed, the card corner labeling speed reaches 100 boxes/minute, greatly improving production efficiency;

◆The label is firmly attached and does not come off. On the flat part of the label, the roller rolls and covers the label firmly, and on the side flat part, the brush presses and adheres firmly;

◆High stability, equipped with a top pressing mechanism, high box conveying stability, and good labeling and overlay effects;

◆Intelligent control, automatic photoelectric tracking, with no labeling for anything, automatic calibration for no labeling, and automatic label detection functions to prevent missing labels and label waste;

◆High stability, advanced electronic control system composed of Panasonic PLC+display control touch screen+Panasonic needle shaped electric eye+German Sik SICK calibration electric eye, supporting 7 × 24-hour operation of equipment;

scope of application

◆Applicable labels: self-adhesive labels, self-adhesive films, electronic supervision codes, barcodes, etc.

◆Applicable products: various types of paper boxes, such as poker boxes, mobile phone packaging boxes, etc.

◆Application industries: Widely used in printing, food, daily chemical, electronics, pharmaceuticals and other industries.

◆Application examples: Nestle box anti tamper labeling, poker card box anti tamper labeling, network card box anti tamper labeling.

Working principle

Core working principle: The sensor detects the product passing through and sends a signal back to the labeling control system. At the appropriate position, the control system controls the motor to send out the label and attach it to the position where the product is to be labeled. The product flows through the labeling brush, and the label is brushed, completing the labeling action of one label.

Operation process: Product placement (connected to the assembly line) ->Product conveying ->Product testing ->Labeling (automatically completed by the equipment) ->Brush labeling ->Collect the labeled products (flow into the next assembly line).

Technical Parameter

The following are the technical parameters of standard models. Other special requirements and functions can be customized according to specific needs

◆Applicable product dimensions (length x width x height/thickness): Length: 20mm~300mm Width: 20mm~250mm Height: 10mm~100mm

◆Labeling accuracy (mm): ± 0.5mm

◆Labeling speed (pcs/min): 40-10pcs/min

◆Weight (kg): Approximately 220kg

◆Frequency (HZ): 50HZ

◆Voltage (V): 220V

◆Power (W): 1470W

◆Equipment dimensions (mm) (length x width x height): 1450 x 1250 x 1300

◆Air pressure (Mpa): 0.4-0.6Mpa

◆Power: 1030W;

To obtain a quotation and technical consultation for this device, please call the Feike National Unified Customer Service Hotline (7 * 24 hours):perhaps