FL air-cooled crusher-Fornitore globale

Product Groups

Firm Information

Transaction Level

VIP member
Contact
Phone

135-0616-0381
Address

No. 182, Liu Shishang, Wenlin Shiyan Village, Zhutang Town, Jiangyin City, Jiangsu Province

Contact Now

FL air-cooled crusher

Contact Supplier

More Products

Product details

Product Introduction

1、 It is mainly suitable for the crushing and processing of low to medium hardness materials in pharmaceuticals, chemicals, and food (such as ginger, chili, pepper, oil wheat, soybeans, white sugar, star anise, cinnamon). The fineness can be adjusted between 10-120 mesh, and it has the advantages of high yield, fine particle size, low noise, low energy consumption, simple maintenance, and easy installation. It is particularly suitable for the crushing and processing of low hardness materials such as oil, viscosity, heat sensitivity, and fiber.

2、 Structure and working principle:
1. Structure: The FL air-cooled crusher mainly consists of components such as the casing, door, turbine, main shaft, screen mesh, pulley, and electric motor.
2. Working principle:
When the pulverizer rotates, the motor drives the spindle and cutterhead to rotate at high speed. The grinding blocks on the cutterhead and screen ring form a crushing and grinding pair. When the material enters the machine cavity from the feeding hopper, it tightly rubs and strongly impacts the inner side of the blades of the cutterhead in the rotating airflow of the cutterhead, and grinds again in the gap between the blades and the grinding blocks. At the same time as crushing materials, the cutterhead sucks in a large amount of air, which plays a role in cooling the machine, grinding materials, and conveying fine materials. The fineness of material crushing depends on the properties of the material and the size of the sieve, as well as the throughput of the material and air.
The bearing components of the crusher are equipped with specially designed labyrinth seals, which can effectively prevent dust from entering the bearing chamber, thereby extending the service life of the bearings. The machine door is equipped with a silicone rubber sealing ring, which prevents dust leakage and pollutes the operating environment.

3、 Characteristics:
1. Strong crushing ability, low energy consumption, and relatively small product fineness.
2. The crushing space is large, and the high-strength wind pressure generated during the operation of the cutterhead can not only improve production capacity and reduce over crushing, but also effectively avoid the sedimentation and blockage of the sieve caused by the material during the crushing process.
3. Due to enhanced shearing, the crushing ability of fibrous materials is higher than that of general equipment.
4. The installation of the screen mesh is convenient and the positioning is reliable, all of which are inserted. The service life is much longer compared to the ring screen form.
5. Design a built-in motor to lower the center of gravity of the machine, effectively reducing equipment noise

4、 Technical parameters:

project	FL-250	FL-350	FL-600
production capacity（kg/h）	30-300	40-800	100-1600
Feed particle size（mm）	5	5	5
mesh(Purpose)	30-120	30-120	30-120
weight（kg）	285	350	650
Spindle speed（r/min）	4500	3800	2900
Total power（kw）	5.5	11	22
External dimensions（Lbhmm）	5504201400	7707501500	120010002250

Online inquiry

Contacts
Company
Telephone
Email
WeChat
Verification Code
Message Content