FOSSVolkswagen fully automatic fiber measurement systemFibertec 2010

Product model:Fibertec™2010

(021: 676221675)

Fibertec 2010Instrument Introduction:

Fibertec 2010Used for according toWeende、van SoestFiber measurement conducted according to laws and other standards. Single or continuous leaching, including boiling, automatic addition of preheating reagents, flushing, and filtration, are all carried out under reproducible and controllable conditions.

Fibertec 2010The basic components are:

1)2010Hot extractor:The built-in heating and filtering system performs hot water hydrolysis and extraction on the sample, and automatically adds preheated reagents.

2)1021Cold extractor: Used for degreasing and extraction of samples (such as lignin determination) in a greenhouse, and can also be used for solvent dehydration of fiber residues.

The above two devices can use the same series of filter crucibles, and if necessary, the sample can be dried and weighed between consecutive extractions. The sample processing in the instrument is carried out in a specially designed filter crucible, which can serve as an integral part of the instrument extraction system during leaching, rinsing, and filtration processes, as well as a sample container during weighing, drying, and ashing processes.

Fibertec 2010Batch processing specialized additional tools (crucible holder) can be used to process six samples at once. It uses a unique suction filter/Backblowing airflow device is used to overcome common problems in filtration.

Fibertec 2010Provide time-saving and convenient methods, and ensure compliance withISOreachECThe standard is used as a reference method for fiber testing standards to obtain highly reproducible fiber measurements.

Fibertec 2010Technical parameters:

1.Sample size:0.5-3can(usually1can)

2.detection range: 0.1-100%

3.detectability: sixA sample/write instructions or comments on

4.reproducibility:In terms of fiber content5-30%Range,Better reproducibility than1%

5.accuracy:Superior to national standards

6.Reagent preheating time:10-20minute

7.Heating time (from preheating to boiling):5-7minute

Fibertec 2010Main features:

Security:

※ Automatically preheat reagents in the built-in sealing system

※ Automatically add preheating reagents

Cold reagents can be easily added (acid)/Alkali)

Economy:

Water saving devices can reduce water consumption

※ Built in extraction/The filtering device can process six samples simultaneously

All functions are integrated into one, which can save a lot of space

Accuracy:

※ Use to meet the requirementsISOreachECStandard crucible

Strengthen high-precision immersion and filtration devices to ensure no loss of samples

※ Use a timer to ensure that each analysis is conducted under exactly the same conditions

Additional advantages:

※ Automatic addition of distilled water

The specially designed crucible clamp makes it very easy to move the sample

The following are andFibertec 2010Accessories and consumables for matching use, available for selection:

（QQ181224356)

10001172/60080351standardP2Crucible, aperture40-100Microns, per package6One.

10004357/60080354American StandardP2Crucible, aperture40-60Microns, per package6One.

10001174 P0Crucible, aperture160-250Microns, per package6One.

10001171 P1Crucible, aperture100-160Microns, per package6One.

10001173 P3Crucible, aperture16-40Microns, per package6One.

10002081Enzymatic hydrolysis culture bottle,6individual/wrap

(021: 676221675)

（FOSSCoarse fiber, cellulose, lignin, cellulose analyzerFT350Cellulose analyzerFibertec 2010，FT350，Fibertec 2010，P2Crucible,FOSSCoarse fiber, cellulose, lignin, cellulose analyzerFT350Cellulose analyzerFibertec 2010，FT350，Fibertec 2010，P2Crucible,FOSSCoarse fiber, cellulose, lignin, cellulose analyzerFT350Cellulose analyzerFibertec 2010，FT350，Fibertec 2010，P2Crucible)