FT-8300Series insulation powder resistivity tester
One Overview:
The insulation powder resistivity tester analyzes the powder at different pressures/Under pressure, the trend of changes in the electrical insulation performance of powder under different porosity states is characterized.Thus, predicting and evaluating the powder in actual production, research and development, and quality improvement provides a reference basis.
High precision load unit, selectable range configuration, direct reading of powder compression displacement value, LCD screen displaying resistance value, resistivity, temperature, pressure value, and automatic unit conversion, easy to operate, ergonomic operation standard Provide proficiency in both Chinese and English languages
II Scope of application:
Widely used in the measurement and analysis of insulation powder particles with similar properties, such as plastic powder, coatings, resin powder, chemical powder, rubber powder, etc It is also suitable for measuring and analyzing the static electricity generated by the change of cohesive force during the compression process of insulation powder
3、 Models and technical indicators:
Specification model |
FT-8300A |
FT-8300B |
1.Resistance resistance |
104Ω ～1012Ω |
104Ω～1×1013Ω |
2.Resistance range |
104 ～ 2.0×1012 Ω-m |
104～ 2.0×1013 Ω-m |
3. Measure voltage range Voltage |
0-500VCan be set arbitrarily |
0-1000VCan be set arbitrarily |
4. Basic accuracy: |
1%(Standard resistance) |
8.Display reading |
LCD display: resistance value, resistivity, temperature, pressure value, automatic unit conversion, cross-section, height, alarm for exceeding upper and lower limits
LCD: resistance, resistivity, temperature, pressure value, the unit automatically conversion, cross-section, height， Super and upper limit alarm
|
10.Pressure Sensors |
200kg(Other specifications can be customized)
(Other specifications can be customized)
|
|
11.Powder measuring device
Powder measuring device
|
Mold: inner diameter 10mm; 20mm (optional), height: 25mm,
Pressure method: manual hydraulic pressure measurement pressure: manual hydraulic pressure / automatic compression mode (purchase).
|
12.Power supply for work |
Input: AC 220V ± 10%, 50Hz power consumption:<30W |
13.Dimensions/Dimensions |
Host MainApproximately L330mm * D350mm * H120mm; Manual device about: approximately H450mm * L200mm * D120mm |
14.Net weight/Net weight |
About 35kg
About 35kg
|
15. Standard configuration, optional, Others buy |
a.1-5 standard calibration resistors; b. 1 measurement certificate, c. 1 height calibration plug gauge
a. Standard calibration resistor 1-5.
b. Measurement certificate 1.
c. Height calibrated plug gauge 1 pcs
|
