summary The FTB acid resistant ceramic pump is a single-stage centrifugal pump. The pump body and pump cover are made of acid resistant ceramics with excellent corrosion resistance, and are externally armored with cast iron for protection. The impeller material is engineering ceramics or engineering plastics, the sealing gasket bed material is fluororubber, and the shaft seal is mechanical seal. This pump has the characteristics of good corrosion resistance, compact structure, tight shaft seal, no pollution of the medium, easy installation and maintenance, and reliable use. It is suitable for transporting various cultural center media that do not contain hard solid particles, do not solidify quickly, and have no corrosive effect on fluororubber, except for hydrofluoric acid and hot concentrated alkali solution. The operating temperature is below 100 ℃ (the operating temperature of the engineering plastic impeller depends on the material and medium), and the temperature difference is less than 50 ℃. broad

Widely used in industries such as petrochemicals, fertilizers, pharmaceuticals, food, papermaking, pesticides, and smelting.
Main Performance Parameters Table (can be produced according to customer requirements)

model	internet traffic	lift	rotational speed	Motor Power KW	Critical vapor Corrosion allowance	Transport medium Maximum Specific Gravity	notes
FTB 3.2/20/-Ⅱ	12.5	20	2900	2.2	4	1.2	Replace FTB 3.2/20/- Ⅰ
FTB 5.0/32/-Ⅱ	25	32	2900	5.5	5	1.3	Replace FTB 5.0/30
FTB 10.0/50/-Ⅱ	80	50	2900	30	5.5	1.5	Replace FTB 10.0/50-I Can also replace FTB 10.0/40 for use
FTB 10.0/15-M1-Ⅱ	40	15	1450	5.5	3	1.5	Replace FTB 10.0/15-M
FTB 10.0/32-168-Ⅱ	60	32	2900	15	6	1.5	Replace FTB 10.0/30-168
FTB 10.0/40/-Ⅱ	100	40	2900	30		1.5

summary
The FTB-ZK acid resistant ceramic mortar pump is a single suction single-stage centrifugal pump. The pump body and pump cover are made of acid resistant ceramics with excellent wear resistance and corrosion resistance, and are externally armored with cast iron for protection. The impeller material is mainly engineering ceramics, and engineering plastics can also be formulated if needed by the user. Copper, fiberglass, stainless steel and other materials, the shaft seal structure adopts blade pressure reduction combined with fluororubber oil seal ring or impeller centrifugal seal.
The pump has the characteristics of corrosion resistance, wear resistance, easy maintenance, and reliable use, and is suitable for transporting various corrosive media containing suspended solid particles except for hydrofluoric acid and hot concentrated alkali solution. The operating temperature is below 100 ℃ (the operating temperature of engineering plastic impellers depends on the material and connection), and the temperature difference suddenly changes by less than 50 ℃. Widely used in industries such as mining, smelting, petroleum, chemical, pesticide, dye, etc.
Main Performance Parameters Table (can be produced according to customer requirements)

model	internet traffic	lift	rotational speed	Motor Power KW	Critical vapor Corrosion allowance	Transport medium Maximum Specific Gravity
FTB-ZK 4.0/20	10	20	2900	2.2	4	1.2
FTB-ZK 5.0/30	20	30	2900	5.5	4	1.2
FTB-ZK 6.5/50	30	50	2900	15	5	1.3
FTB-ZK 8.0/30	40	30	2900	11	5	1.3
FTB-ZK 10.0/35	60	35	2900	18.5	5	1.4
FTB-ZK 15.0/25-D	120	25	1450	30	6	1.4
FTB-ZK 15.0/40-M	150	40	1450	45	6	1.4
FTB-ZK 15.0/25	220	25	1450	37	6	1.4