overview

FY(HY)The series vertical submersible pump is a single-stage single suction long shaft submersible centrifugal pump developed and produced by our company in combination with similar products at home and abroad. This pump does not have a sealing structure, which solves the maintenance problem caused by seal wear. It is suitable for conveying general corrosive media with temperatures ranging from 0 to 105 ℃, without solid particles or abrasives. The pump has high efficiency and no leakage, and is widely used in industries such as petroleum, chemical, metallurgy, environmental protection, pharmaceuticals, and sewage treatment.

If the conveying medium contains a small amount of solid particles, our company's LJYA series cantilever submersible pump or semi open impeller can be used.

Performance range of pump: flow rate from 1.6 to 400m³/h. The lift is 5-80m.
According to the different media being transported, the material of the liquid contact part of the FY (HY) series vertical submersible pump can be made of materials such as 304, 316L, 904, duplex steel, cast steel, cast iron, etc.

Explanation of pump model meaning

50FY(HY)-25A

50——Pump suction diameter (mm)

FY——Stainless steel vertical submersible pump code

HY——Code for cast iron vertical submersible pump

25——Rated head (m) when the impeller is not cut at standard speed

A——Cutting sequence of impeller

Main technical parameters

*This parameter table may not fully list the pump models and parameters. Please consult for details400-6636-008.

*The power of the motor used for this pump is similar to that of clean water in terms of medium density and viscosity. When ordering, please consider factors such as medium density, viscosity, and usage environment.