Introduction to fiberglass raw water tank:

If the resin content is greater than 90%, the storage tank should be wrapped and coated, and UV absorbers should be added to the resin to slow down aging. The performance characteristics and connection methods of fiberglass storage tanks are well-known to everyone, and the details are not very clear. Therefore, today we want to popularize the following knowledge so that you will not be confused by these issues when using them. Fiberglass storage tanks have strong chemical corrosion resistance and long service life. Fiberglass has special corrosion resistance, and the storage medium performance is much stronger than products made of other materials. It can withstand various acids, alkalis, salts, and organic solvents. The design has great flexibility, and the tank size can be produced according to customer requirements. Yihua can produce large fiberglass storage tanks with a diameter of 25 meters. Has excellent performance, low thermal conductivity, good insulation performance, and can withstand high temperatures up to 250 ℃. Fiberglass storage tanks can withstand various acid, alkali, and salt media. For fiberglass storage tanks, the first two connection methods are mostly used for fixed connections between pipes and pipes, and between pipes and fittings.

Planning different pressures based on structural layer thickness, winding angle, and wall thickness is a distinct feature of fiber winding composite materials. It can be widely used in petroleum, chemical, textile, printing and dyeing, electricity, transportation, food brewing, artificial synthesis, water supply and drainage, seawater desalination, water conservancy irrigation, and national defense engineering. The storage of various corrosive media can withstand various acids, alkalis, salts, and organic solvents. It is mainly used in petroleum, chemical, printing and dyeing, brewing, water supply and drainage, transportation and other work. It is used for the storage and transportation of various products such as sulfuric acid, formaldehyde, methanol, alcoholic beverages, hydrogen peroxide, sewage, etc. It can also be used as underground oil tanks, insulation storage tanks, transportation tankers, etc. Fiberglass storage tanks and containers are lightweight, high-strength, corrosion-resistant, with a large volume, small footprint, no need for transportation, easy installation, low repair costs, and users can supervise production. They are primarily used in fields such as petroleum, chemical, and food brewing. The inner layer of fiberglass storage tanks (also known as the middle corrosion-resistant layer) is usually reinforced with lining resin and knitted felt.

Exposure to sunlight can cause the outer layer to fade or peel, affecting its lifespan; If it must be placed outdoors, it is necessary to apply ultraviolet absorbers on the outer surface to prevent photo oxidative aging. If there is no liquid in the tank when filling, the poured liquid will impact the tank and accelerate its aging, making it more prone to damage over time. Therefore, it is recommended to replenish the tank with liquid as much as possible. The correct usage method of the fiberglass tank mentioned above is hoped to be helpful to everyone. Physical properties: Fiberglass tanks have excellent physical properties. The specific gravity of fiberglass is usually 1.5~1.9g/cm3, which is 1/4~1/5 of steel and has higher specific strength than steel, cast iron, and plastic. The thermal expansion coefficient of fiberglass is roughly equivalent to that of steel, and the thermal conductivity coefficient is only 0.5% of steel. Chemical corrosion resistance: Fiberglass tanks have chemical corrosion resistance: by selecting different types of resins, they can withstand various acids, alkali salts, as well as various oils and solvents. Fiberglass acid alkali tanks can be widely used in various aspects of chemical corrosion prevention.