product details
The S350YS fixed scanning thermal imaging laser gas imaging telemetry instrument consists of two parts: the host computer and the upper computer. It uses the principle of laser absorption spectroscopy technology to remotely and real-time monitor the methane gas concentration located in the detection area of the laser transceiver device, and has functions such as signal acquisition, conversion, and transmission.
characteristic:
◆ Active detection of three-dimensional space
360 ° horizontal and 180 ° vertical rotation scanning
◆ Synchronized camera capture
◆ Backend computer monitoring
◆ Thermal imaging detector 400 (H) × 300 (V), response band 8-14 μ m
Technical Parameter
Technical parameters:
Product Technical Parameters:
Gas detection: CH4
Detection principle: TDLAS
Range optional (0~5000) ppm. m; (0~10000)ppm.m
(0~50000)ppm.m; (0~100)%LEL
Sensitivity: 5ppm. m
Effective detection distance: 0-100 meters
Video Camera: Equipped with Video Camera
Pan tilt scanning angle: 0-360 °- 90~+90°
Response time: 0.5 seconds
Working power supply: AC220V
Output interface: RS485
Explosion proof mark: Ex d IIC T4 Gb
Protection level: IP68
Net weight of product: 30kg
Installation method: Seat installation
Environmental temperature: -40 to+65 ℃
Environmental humidity: (0-90)% RH without condensation
Thermal imaging technology parameters:
Detector type: Uncooled infrared focal plane sensor
Resolution: 400 × 300
Pixel spacing: 17 μ m
Response band: 8-14 μ m
Thermal sensitivity: NETD 40mK/F1.0
Frame rate output: 50/60Hz
Focal length: 25mm (8mm, 15mm, and other lenses are optional)
Field of view angle: 15 °× 11 °
F-value: 1.0
Pseudo color image modes: a total of 17 types including white hot, black hot, iron red, etc
Image parameters: brightness, contrast, sharpness
Noise reduction function: automatic/manual 2D, 3D
FFC control: automatic/manual
Temperature bar: on/off
Video encoding format: H.265/H.264/MJPEG
Temperature measurement function: point temperature measurement, line temperature measurement, polygonal area temperature measurement, full screen temperature measurement
Temperature measurement alarm: over temperature alarm, temperature difference alarm, temperature range alarm
Temperature measurement range:- 20℃~+150℃; 0℃-550℃
Temperature measurement accuracy: ± 2 ℃ or ± 2%, whichever is greater (emissivity, distance, ambient temperature, etc. settings)
Temperature response time: ≤ 30ms
Temperature value display mode: specified position/following area/off
Alarm area display: on/off
Intelligent alarm: motion detection alarm, I/O alarm, disk alarm, temperature measurement warning, intelligent analysis alarm, network abnormality alarm
Intelligent analysis: regional intrusion, cordon, double cordon, item retention, item removal