Cable Type
Shielded and unshielded twisted pair LAN cabling
TIA categories 3, 4, 5, 5e, 6, 6A: 100 Ω
ISO/IECC、D、E、EGrade A: 100 ohms and 120 ohms
Testing standards
TIA
According to TIA 568-C.2 or TIA-1005 Class 3, 5, 5e, 6, 6A
ISO/IEC
According to ISO/IEC 11801:2002 and revisions C and D, E, EAClass
*High frequency
DSX-600:500 MHz
Standard Link Interface Adapter
Long term link adapter
Plug type: shielded RJ45 (only for DSX-600-PRO)
General specifications
Automatic testing speed
Fully bidirectional automatic testing for Category 5e or 6/Class D or E: 9 seconds;
Complete bidirectional 6A/EALevel automatic test: 10 seconds
Supported testing parameters (testing standards determine the parameters and frequency range of the report)
Wiring diagram, length, propagation delay, delay deviation, DC loop resistance, insertion loss (attenuation), return loss (RL), near end crosstalk (NEXT), attenuation crosstalk ratio (ACR-N), ACR-F (ELFXT), comprehensive ACR-F (PS ELFXT), comprehensive NEXT, comprehensive ACR-N
*High frequency
500 MHz
Test result storage
12000 Cat 6A with diagram
display
5.7-inch LCD with inductive capacitive touch screen
volume
Host and intelligent remote unit: 2.625 inches x 5.25 inches x 11.0 inches (6.67 cm x 13.33 cm x 27.94 cm)
weight
3 pounds (1.36 kilograms)
battery
Lithium ion battery pack, 7.2 V
BATTERY LIFE
8 hours
Battery charging time
4 hours (below 40 ° C, the tester is turned off)
Environmental Specifications
operate temperature
32 ° F to 113 ° F (0 ° C to 45 ° C)
Storage temperature
-22 ° F to+140 ° F (-30 ° C to+60 ° C)
Relative humidity at work (% RH without condensation)
0% - 90%, 32° F - 95° F:(0° C - 35° C)
0% - 70%, 95° F - 113° F:(35° C - 45° C)
vibrate
Random, 2 g, 5 Hz -500 Hz
impact
1-meter drop test (with or without modules and adapters)
secure
CSA 22.2 No. 61010, IEC 61010-1 Part 3Version
altitude
13123 feet (4000 meters)
10500 feet (3200 meters), including AC adapter
EMC
EN 61326-1: Portable
| function | DSX-600 | Versiv DSX-5000 | Versiv DSX-8000 |
|---|---|---|---|
| describe | Essential Cat 6A and Class EACopper cable tester | Cat 6A and Class FACopper cable tester | *Fast and accurate Cat 8 and Class I/II copper cable tester |
| Cat 3 – Cat 6A / Class EA | X | X | X |
| Class FA | X | X | |
| Cat 8 / Class I/II | X | ||
| *High frequency | 500 MHz | 1000 MHz | 2000 MHz |
| Automatic testing time | 10 seconds Class EA/Cat 6A 9-second Class E/Cat 6 |
10 seconds Class EA/Cat 6A 9-second Class E/Cat 6 |
16 seconds Cat 8/Class I/II 8 seconds Class EA/Cat 6A 7 seconds Class E/Cat 6 |
| Shield integrity testing | X | X | X |
| Memory | ≈ 12000 Cat 6A with diagram | ≈ 12000 Cat 6A with diagram | ≈ 12000 Cat 6A with diagram |
| BATTERY LIFE | ≈ 8 hours | ≈ 8 hours | ≈ 8 hours |
| Cable identifier length | 60 characters | 60 characters | 60 characters |
| Long term link adapter | optional | X | X |
| ProjXTMProject Management | X | X | X |
| TaptiveTMGesture user interface | X | X | X |
| Advanced fault information diagnosis | Limited - (HDTDR&HDTDX) | X | X |
| PoE resistor imbalance | X | X | |
| Integrated external crosstalk function | X | X | |
| LinkWareTMProfessional report | X | X | X |
| LinkWareTMReal time support | X | X | X |
| TCL measurement | X | X | |
| Coaxial adapter | optional | optional | optional |
| M12 adapter | optional | optional | optional |
| Jumper adapter | optional | optional | |
| Fiber Optic - OLTS, OTDR, and Detection | optional | optional | |
| The modular Versiv series is designed for the future to support TIA Cat 8 and ISO Class I/II, single-mode and multi-mode fiber loss, OTDR testing, and inspection. Advanced diagnosis can instantly identify the cause and location of cable faults using simple language. Both Versiv copper cable testers provide measurement support for advanced technologies, including external crosstalk in NBASE-T and other applications, as well as impedance imbalance in Power over Ethernet (PoE). |
