Product Overview:

Compared with conventional axial flow pumps, JXF type clamp plate axial flow pumps have greatly improved in corrosion resistance, wear resistance, high temperature resistance, non leakage, efficiency, and other aspects!

JXF type fluorine lined axial flow pump is a mature product designed and verified by the market for many years. Currently, it is widely used in the titanium dioxide industry for waste acid concentration treatment, and the effect is particularly good!

This pump has the characteristics of high efficiency and good cavitation performance. The JXF type clamp plate axial flow pump produced under conditions where titanium alloys cannot last for a long time can be used for several years.

Characteristics of Fluorine lined Axial Flow Pump

1、 Strong corrosion resistance
The overcurrent part of the pump is entirely made of PFA material, which has strong adaptability to corrosive liquids such as nitric acid, sulfuric acid, hydrochloric acid, phosphoric acid, and strong oxidants. Especially the stronger the corrosiveness, the better its performance can be demonstrated. Its corrosion resistance far exceeds that of high nickel alloys, 20 grade alloys, and even higher than high silicon cast iron, earning it a reputation for corrosion resistance within its range.

2、 Excellent wear resistance
The pump is made by special processes of baking, melting, and molding. The fluorine lining thickness of the steel lined composite pump body is over 10mm, and the fluorine lining thickness of the clamp type pump body is over 25mm. Special treatment is carried out on the fluorine inner wall to resist ferrous sulfate abrasion, which is second to none.


3、 Excellent high temperature resistance performance
Due to its excellent thermal shock resistance, self-lubricating properties, and impact resistance. Therefore, key parts of fluoroplastics such as impellers will not crack due to impact, making up for the fragility of ceramic pumps and high silicon cast iron pumps. Due to excellent overall performance and smooth operation, it can be used with confidence for a long time in harsh environments ranging from -30 ℃ to 150 ℃. (Waste acid concentration treatment at a high temperature of 130 ℃, while the melting point of fluorine material is 360 ℃)


4、 Easy disassembly and maintenance
Due to the use of fluorine materials for the impeller, pump cover, and shaft sleeve, the weight of the pump is greatly reduced, and the rotor part can be easily and conveniently removed from the pump body. Therefore, disassembly, assembly, and installation can be easily completed. Avoiding the need for careful repair, fear of breakage, and inability to open hands and feet when repairing ferrosilicon pumps.
In summary, this pump is an ideal and suitable specialized pump for the concentration treatment of titanium dioxide waste acid.

Structural characteristics of JXF clamp type axial flow pump
1. This pump is designed according to the required parameters and characteristics of an axial flow pump, based on optimal flow conditions.
2. This pump adopts a rear opening pull-out structure pump, which is easy to disassemble and maintain. During maintenance, the connecting pipeline can be removed without disassembling, and the pump shaft can be removed.
3. The shaft seal adopts a new combination seal, which is suitable for transporting highly corrosive liquids containing suspended particles.
4. The pump body flow channel is not easily blocked, with a large cavitation allowance. The shaft and bearing design have high reliability, ensuring smooth operation, low vibration, low noise, and long service life.
5. The direction of rotation of the pump is indicated by arrows on the bearing bracket.

Structure of fluorine lined axial flow pump
This series of pumps is a cantilever structure, and can also be installed horizontally using belt pulley transmission according to user needs to adjust flow and head.

JXF type fluorine lined axial flow pump mechanical seal
The mechanical seal adopts a double end seal, and the static ring is made of imported Hastelloy alloy material. The dynamic ring is flushed with cooling water. Alternatively, an external single end mechanical seal can be used.

Installation of JXF type clamp plate axial flow pump
1、 Before installation, the foundation dimensions, position, surface condition, and elevation should be checked to ensure they meet the design requirements.
2、 After washing and pouring concrete into the anchor bolt hole, it should solidify for at least 48 hours and recheck the level and verticality of the pump.
3、 The pump and motor are installed on the same axis, with a deviation of no more than 0.2mm.
4、 The connecting pipeline of the pump should be properly supported with brackets, and the pump should not bear the weight of the device.

Product features:

The JXF fluorine lined axial flow pump is a new type of pump manufactured by our company based on the steel lined composite pump that has accumulated rich experience and been used in the titanium dioxide waste acid concentration section for a long time. It has been improved and processed through dozens of processes. Significant improvements have been made in corrosion resistance, wear resistance, high temperature resistance, leak resistance, efficiency, and other aspects. In the titanium dioxide industry, our company's waste acid concentration pump technology is mature, with a long service life and a long usage time (four years) in the waste acid concentration treatment section.

Performance parameters:

Performance parameter table of JXF fluorine lined axial flow pump

Application areas: