2、 Installation diagram of chilled water metering system
The chilled water used for air conditioning generally has a water temperature level of 5-6 ℃, and the refrigerant is fresh water. For cooling below 5 ℃, salt water or other cooling media should be used. The cooling capacity measurement method for fresh frozen water often adopts the mass flow based measurement method as shown in the following figure.

(1) In the flow measurement of chilled water, HTD electromagnetic flowmeter has obvious advantages, and its characteristics are as follows:
Electromagnetic flowmeter measurement is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity.
The electromagnetic flowmeter measuring tube has unobstructed flow components, no pressure loss, and low requirements for straight pipe sections.
The electromagnetic flowmeter sensor can be equipped with a grounding electrode to achieve good grounding of the instrument.
The electromagnetic flowmeter sensor adopts advanced processing technology, which makes the instrument have good anti negative pressure ability
① The lining selection of HTD series electromagnetic flowmeter: If the chilled water is fresh water, rubber lining can be chosen, which is relatively low in cost. If the chilled water is saline water, PTFE lining must be selected. If both fresh water and saline water are measured, PTFE lining must be selected. HTD electromagnetic flowmeter can choose the appropriate lining material according to the on-site situation.
② The selection of thermal resistance, Huitong Instrument adopts high-quality and high-precision A-level armored thermal resistance, with an accuracy of ± 0.2%, greatly improving the accuracy of the system. The thermal resistance junction box is waterproof and moisture-proof, with a long service life.
③ The XSHT series heat accumulator collects, displays, controls, transmits, communicates, prints and processes various signals such as temperature and flow on site, forming a digital acquisition system and control system. It is suitable for heating systems and heat exchange systems such as thermal oil boilers and water heating, as well as for measuring the cooling capacity and heat of air conditioning units, buildings and heat exchange stations, and heat company pipelines. It achieves online measurement of heat and mass transfer, providing a basis for enterprise energy management, energy consumption measurement, and technical economy.

(2) In addition to electromagnetic flowmeter measurement, ultrasonic flowmeter can also be used for measurement. Customers can choose according to the on-site situation. The installation diagram of the ultrasonic flowmeter thermal energy measurement system is shown below.
① The HT series ultrasonic flowmeter adopts the international standard enthalpy value heat calculation formula (enthalpy difference method) to measure the cooling/heating capacity. To meet the needs of users in different working conditions, it can be divided into integrated and split types, suitable for measuring the cooling and heating capacity of air conditioning units, buildings, heat exchange stations, and thermal power company pipelines.
② The selection of thermal resistance, Huitong Instrument adopts high-quality and high-precision A-level armored thermal resistance, with an accuracy of ± 0.2%, greatly improving the accuracy of the system. The thermal resistance junction box is waterproof and moisture-proof, with a long service life.