Fully automatic hydraulic pressure calibrator

1、 Overview
The fully automatic pressure calibration table is a standard testing device for electric pressurization with a range of 0-60MPa newly launched by our company. It fully adopts the needs of customers in terms of pressure occurrence, pressure adjustment, precise measurement, etc. in pressure measurement work, making the electrification and automation of pressure measurement a reality.

Fully automatic hydraulic pressure calibrator

2、 Characteristics
1. Small in size and easy to carry, it can be used as a pressure calibration device for on-site measurement.

2. There are three pressure repair methods: large, small, and reset, which can stabilize the pressure value at the detection point within the required range.

3. The supporting software and optional accessories are complete and can be upgraded at any time.

4. The operation panel is clear and intuitive, allowing operators to learn without a teacher.

5. Wide range of measurement (with multiple optional standards and testing modules).

6. No need for manual pressurization, fully automatic pressurization and depressurization.

7. Can verify 2 or more pressure gauges to improve work efficiency.

8. High power pressurization design, long lifespan, maintenance free.

3、 Main technical parameters

Measurement range pressure: Hydraulic: 0-60M Pa
Current: 0-20mA

Accuracy: Pressure: 0.05% F · S
Current: 0.02% F · S

DC voltage output: 24VDC

Resolution: Pressure: Less than 1Pa
Current: 1 μ A

Pressure fluctuation range: 0.05% F · S/5S

Power consumption:<500VA

漂 移： ＜0.01% F·S/ 年

Usage conditions: Power supply: AC220 ± 10% 50Hz
Temperature: 15-35 ℃
Humidity: 0-80% RH

Medium: Transformer oil, purified water

4、 Mechanical principles

5、 Electrical principles

6、 Precautions
1. The maximum pressure of the hydraulic pump is 70M Pa
2. The output during oil medium testing is 0-1-60M Pa
3. The pressure transmission medium of the hydraulic pump is 10 # test oil
4. Select a power supply that meets the requirements, connect it safely, install grounding wires and fuses.
5. Conditional laboratories should take fixed measures to keep the device in a horizontal state.