product description

GE (formerly Krautkramer) in the United StatesUltrasonic hardness testerMIC10utilizeUCI(Ultrasonic Contact Impedance-Ultrasonic contact impedance)The method can quickly and conveniently evaluate the Vickers hardness indentation without the need for a microscope. Small and lightMIC 10Powered by batteries, it can be quickly used on site without restrictions in all aspects, and can even be used at the end position. This instrument is suitable for most fine grains and materials of any shape and size, especially for determining material properties within a small tolerance range. The measurable parts of the workpiece include the flange edge and gear root, and can also be measured in any direction, such as horizontal or vertical upward.

This compact instrument can achieve: by pressing a key, you can see the single value display or effective arithmetic mean display of the hardness measurement setting reading. Editing error values is very simple and does not require interrupting measurement settings. The warning threshold is adjustable, and when the critical value is reached, the screen will display and accompanied by an audible alarm. MIC 10 has set measurement calibration parameters for low alloy and non alloy steels, and you can easily recalibrate other materials. The instrument can also be customized for specific testing requirements: unnecessary functions such as multiple hardness systems and recalibration functions can be disabled. This can reduce buttons and simplify operations. After carefully studying the issue of data storage, we have developed the MIC 10DL, which provides you with repeatable testing and document processing support. As a supplement to internal memory, memory cards can not only store measurement data, but also instrument settings data and report formats related to materials. You can automatically calibrate the instrument for special materials based on the data in the storage card. The report can be printed in the set format through the RS232C interface of MIC 10. The operation is equally simple: open the data storage or insert the storage card to perform the measurement. Afterwards, the complete measurement settings will be automatically stored in the next available storage space. At any time in the future, data can be called, displayed, and printed. In addition, the UltraHARD series interface program allows you to transfer data to a computer and perform further data processing, such as data evaluation, statistics, and document creation.

Advantage

Anytime, anywhere, fast and efficient

Ultrasonic hardness tester MIC10/MIC10DL for measuring gearsWhen using the MIC10 ultrasonic hardness tester to measure the root of gear teeth, it is recommended to choose the MIC205AL probe, which is a long probe with a load of 5KG, as the measurement location can be closer to the root of the tooth surface.Like other hardness testers in our MICRODUR series, MIC 10 is measured using the Ultrasonic Contact Impedance (UCI) method. This method makes it convenient and fast to locate the probe and read the readings. This is because the Vickers diamond indenter on the surface of the material is measured electronically and immediately displays hardnessThe degree value was evaluated without the cumbersome use of an optical microscope.

The compact and convenient MIC 10 brings convenience to your life:You can take it anywhere - on scaffolding for testing large containers and pipelines, or anywhere you want to test components. The narrow probe can even allow you to measure in difficult to access locations, such as the tooth flank or gear root.You can measure in any direction, such as horizontally or overhead. The instrument support and positioning device enable two operations to be performed simultaneously, correcting the probe position and guidance.

Advantage

Probe and accessories: Manual standard probeMIC20A1：10N/1KgfLoad, especially suitable for small groove surfaces Manual standard probeMIC205A：50N/5KgfLoad, suitable for most applications Manual standard probeMIC2010A：100N/10KgfLoad, suitable for coarse-grained materials and rough surfaces Manual long probeMIC201AL(10N/1Kgfload)/MIC205AL(50N/5Kgfload)：Equipped with a longer oscillating rod(37mm). Used for measuring contour surfaces or deep inner cavities of workpiece structures/In the groove.Such as worm gears and meshing gears. Electric probeMIC2103A(3N/0.3Kgf)、MIC211A(about8N/0.8Kgf)And electric probeMIC2101A(1N/0.1Kgf)： Equipped with an electrically controlled Vickers hardness tester diamond, reliable measurement results can be obtained. Electric probeMIC2103A(3N/0.3Kgf)、MIC211A(about8N/0.8Kgf)And electric probeMIC2101A(1N/0.1Kgf)： Equipped with an electrically controlled Vickers hardness tester diamond, reliable measurement results can be obtained. Qualified hardness reference block for inspectionAndShort probe, standard probe, long probe, electric probe

Technical parameters: Measurement/Conversion Range: 20-1740HV, 48-105HRB, 20-68HRC, 76-618HB, 5-2250N/mm2 (10kg probe) Display: 4-digit LCD with switch backlight Resolution: 1HV; 1HB； 5N/mm2； 0.1/0.5/1HRC and HRB (optional) Data memory: The data logger can store 1500 measurement values, and the storage card can store 590 data (MIC10DL) Interface: RS232 interface, can be used for bidirectional communication between printers and computers (MIC10DL) Power supply: 2 1.5V batteries Size and weight: 160x70x45mm, 300g