The GX-513E edge compression/ring compression testing machine can be used with various materials for comprehensive testing. In terms of paper packaging materials, it can perform various paper quality tests, including ring compression (RCT), flat compression (FCT), edge compression (ECT), adhesion (PAT), and general compression testing (CMT). It is a testing equipment that combines multiple functions. Due to transportation needs, cardboard boxes will be stacked up, so the tolerance of weight load depends on the performance of the cardboard
Advantages of GX-513E edge pressure/ring pressure testing machine:
1. After the test is completed, there is an automatic return function that automatically determines the crushing force and saves the test data
2. Three adjustable speeds, fully Chinese LCD display interface, and multiple units to choose from.
3. Can input relevant data and automatically convert ring compression strength, edge compression strength, with built-in packaging stacking testing function; The force and time can be directly set, and the machine will automatically stop after the test is completed.
Performance characteristics of GX-513E edge pressure/ring pressure testing machine:
1. 32-bit embedded processing chip with fast instruction cycles;
2. Strain measurement accuracy>4 levels, i.e. resolution>20000 yards;
3. Use software coefficient file calibration (correction). Effectively correcting the linearity of the sensor;
4. Four fold photoelectric encoder with bidirectional counting and high resolution;
5. The display adopts a large monochrome LCD screen with a 192 × 64 dot matrix, which can display more information;
6. 1 RS232 serial port, which can be connected to other devices;
7. 1-channel printing port, can be connected to micro printers or dot matrix printers;
8. 8 control buttons (5 function keys, 3 reuse keys), easy to operate;
9. Force units: N, kN, kgf, gf, lbf;
10. Stress units: Pa, kPa, MPa, kgf/cm2, lbf/in2;
11. Length (area) unit: mm, cm, in; (Optional)
12. Input function: dual channel simulation signal;
13. Display function: At the end of the experiment, the maximum force during the experiment can be automatically displayed and memorized;
14. Save output: Up to 20 test results can be recorded.
Technical parameters of GX-513E edge pressure/ring pressure testing machine
Capacity: 60-5000N
Accuracy of indication: ± 1%
Resolution: 1N
Pressure plate: ￠ 100mm
Pressure plate spacing: 75mm
Test speed: 12.7mm/min
Geometric error: Flatness<0.05mm; Parallelism error less than 1/2000 × B (B is the diameter of the circular pressure plate)
Horsepower: 1/4HP
Volume: 500 × 270 × 520mm (W × D × H)
Weight: 52kg
Power supply: 1 ∧, AC220V,1.5A
Design standards: CNS2956, JISP8126, TAPPIT472, GB/T2679.6-1996, GB/T6548-1998
Standard configuration: One set of vertical pressure fixtures
Optional configuration: parallel sampler; Ring pressure sampler ring pressure fixture; Flat press fixture; Adhesive strength fixture