Gas chromatograph manufacturer supplies methane converter chromatography accessories

Gas chromatograph manufacturer supplies methane converterpurpose：

Gas chromatography analysis: Trace amounts of carbon monoxide and carbon dioxide in gas samples.

Gas chromatography analysis: analysis of dissolved gases in power transformer oil;

Gas chromatography analysis: synthesis of ammonia from fertilizers, including high-purity hydrogen, high-purity nitrogen, high-purity oxygen, high-purity helium, high-purity argon, etc

Gas chromatography analysis: analysis of impurities such as carbon monoxide and carbon dioxide in gases;

It can also be used for offline detection of air separation products, quality control of high-purity gas manufacturers, and other purposes.

characteristic：

The methane conversion furnace adopts high-efficiency nickel catalyst and uses hydrogen as the carrier gas or nitrogen as the carrier gas column for hydrogenation, converting trace amounts of CO and CO2 that cannot be detected by hydrogen flame ionization detector into CH4. The methane conversion furnace produced by Shanghai Xuansheng Science has high conversion efficiency, small dead volume, uniform temperature field, and very high detection sensitivity for analyzing trace amounts of CO, CH4, and CO2 in various high-purity gases, with a minimum detection concentration of ≤ 0.1ppm.

Gas chromatograph manufacturers provide technical specifications for methane conversion furnace chromatography accessories:

Temperature control range of converter: 0-400 ℃

Methanation conversion temperature: 350 ℃~380 ℃;

Temperature control method: Platinum resistance (100 Ω);

Temperature control accuracy: ± 0.1 ℃ (360 ℃)

Methanation conversion rate: ≥ 98；

Service life of conversion agent: 2-5 years or more (sample does not contain sulfur, oil, etc.).

The methane conversion furnace produced by Xuansheng Scientific Instrument Co., Ltd. can be installed on various types of chromatographs at home and abroad, with flexible installation that can be installed inside or outside the instrument according to customer requirements.