VIP member
Gepu water hardness tester
Brief description: The Aqualysis800 water hardness tester is suitable for monitoring the hardness of water quality in boiler water, softener effluent,
Product details
Gepu water hardness testerAqualysis800
Gepu water hardness testerAqualysis800According to the principle of titration colorimetry, the selectable limit values are controlled, and accurate measurement readings are provided through extinction method. Multiple functions ensure the reliability of real-time operation.
Aqualysis800 detectorParameters:
| Specification and model | Aqualysis800 (OEM available) |
| measuring method | Titration colorimetric method |
| Time | About 3 minutes, depending on the hardness of the water |
| accuracy | ± 2% of the upper limit of the selected reagent |
| repeatability | ± 1% of the upper limit of the selected reagent |
| power supply | 85 - 265 VAC, 47-63Hz， |
| power consumption | 25VA (operating), 3.5VA (standby) |
| Protection, etc | IP65 |
| size | 400x300x180mm(WxHxD) |
| display | LCD color screen display |
| selectable unit | ° dH, ° f, ppmCaCO3, mmol/l |
| output | 1. 4-channel programmable relay output (max.250V, 4A) |
| 2. 1 channel 4-20 mA signal, max 750 Ω | |
| 3. 1 RS485 output | |
| input | 1. IN1 input (start analysis/flow control switch/water meter) |
| 2. IN2 input (reset device) | |
| Analysis cycle | Time interval measurement (0~360min)/external signal/flow signal |
| Rinse time | Can be set (15~1800s) |
| Water quality requirements | pH：4 – 10 |
| Iron:<3 ppm | |
| Copper:<0.2 ppm | |
| Aluminum:<0.1 ppm | |
| Manganese:<0.2 ppm | |
| temperature | Environment: 10 ° C -40 ° C |
| Water sample: 5 ° C-40 ° C | |
| pressure | Ca. 0.2-5 bar (max) (recommended 1-2 bar) |
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-