VIP member
German OEM microinjection pump
Germany's OME produced microinjection pump, syringe VP9101 injection pump, can mainly be built into the instrument and controlled by computer protocol
Product details
Germany OME produced microinjection pumpVP9101 injection pump, syringe parameters
| Voltage requirements: | Supply voltage: | 24VDC ± 5V | |
| electric current: | Max.1A |
||
| Maximum load: | 3000 steps | ||
| Piston drive: | Principle: | Quad encoder for loss of steps, detection of loss steps with error message |
|
| Rated travel: | 30mm | ||
| Piston speed: | 1.2 sec. - 20 min./full stroke (speed ranges vary depending on syringe size and tubing) | ||
| Sample injection tube: | Type: | XP: 50µl, 100µl, 250µl, 500µl, 1.0ml, 2.5ml, 5.0ml | |
| Accuracy: | 0.05% CV within run at full stroke (for 1000µl syringe and above) | ||
| Error rate: | <1.0% at full stroke | ||
| Flow contact: | Glass, PCTFE and Teflon | ||
| Valve/Valve Drive: | Valve options: | 120° 3-port distribution | |
| Running time: | 250ms between adjacent ports | ||
| Driver: | Stepper motor with optical sensor for position detection |
||
| Positions: | Input, output, bypass | ||
| Material Science: | Plug: virgin teflon Body: PCTFE |
||
| Suitable interface: | 1/4-28"-UNF screw fitting for syringe | ||
| Valve connected drainage tube | |||
| Screw pattern connector | |||
| thread | pipe diameter | Item number | |
| M6 | 3.2mm(1/18") | 4130005 | |
| 1/4x28" | 3.2mm(1/18") | 4130020 | |
| M6 | 1.6mm(1/16") | 4130016 | |
| 1/4x28" | 1.6mm(1/16") | 4130019 | |
| M6 | 2.7mm | 4130004 | |
| 1/4x28" | 2.7mm | 4130025 | |
| Female luer Caps,10 per Pack | 2702206 |
||
| Screw pattern joint gasket | |||
| For pipe diameter | For item number | ||
| 3.2mm | 4132032 | ||
| 1.6mm | 4132016 | ||
| 2.7mm | 4132031 | ||
| Communication interface: | Type: | RS 232, RS 485 or CAN bus | |
| Communication speed: | 9.600 or 38.400, 100K or 125K (CAN bus) |
||
| Format: | Data bits: 8 parity: none Stop bits: 1 half duplex |
||
| Address dialing code: | up to 15 XP/AL devices can be addressed individually | ||
| Information: | Data terminal and OEM protocol | ||
| Firmware: | Programmable ramps, cutoffs, backlash compensation, plunger speeds, delays and loops Arbitrarily selectable plunger speed Clearance compensation Absolute and relative positions Diagnostics Flash-PROM |
||
| Environmental temperature: | Temperature: 17-37°C Humidity: 10-85% Non condensing RH at: 5°C-40°C |
||
| Size: | Height: | 127mm (+)1mm |
|
| Width: | 45mm (+)1mm |
||
| Depth: | 113mm | ||
| Weight: | 1.2kg | ||
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-