Guangdong Fluke DTX1800 Cable Certification Analyzer

The DTX1800 series copper cable certification analyzer ensures that wiring installation companies comply with TIA/ISO standards.

• DTX can significantly reduce the total certification cost by up to 33% annually.
• *Trusted and widely used tester - certified over one billion copper links to date
• Through ETL independent verification, it meets the accuracy requirements of ISO IV and TIA IIIe levels
• Analyze test results and create professional test reports using LinkWare reporting software
• Recognized by over 20 cable companies worldwide
• Performing basic fiber authentication with DTX fiber optic modules can increase speed by five times

• Perform extended fiber authentication

  Model/Name	Instructions
  DTX-1800	DTX-1800 cable certification analyzer: including DTX-1800 main tester and intelligent remote tester, LinkWare PC software, 128MB multimedia card Cat 6A /EAClass Long Term Link Adapter (2), Cat 6/Class E Channel Adapter (2), Call Earphones (2), AC Charger (2), Portable Bag, USB Interface Cable (Mini-B), RS-232 Serial Cable (DB9 to IEEE1394), User Manual
  DTX-1200	DTX-1200 cable certification analyzer: including DTX-1200 main tester and intelligent remote tester, LinkWare PC software, Cat 6/E level long haul link adapter (2), Cat 6/E level channel adapter (2), call headphones (2), AC charger (2), portable bag, USB interface cable (Mini-B), user manual
  DTX-LT	DTX-LT cable certification analyzer: including DTX-LT main tester and intelligent remote tester, LinkWare PC software, Cat 6/E long-term link adapter (2), Cat 6/E channel adapter (1), AC charger (2), portable bag, USB interface cable (Mini-B), user manual (2 books), portable bag, user manual
  DTX-ELT	CableAnalyzer Category 6 Electrical Installation Certification (* * Europe, Middle East, and Africa region)
  DTX-CLT-J	CableAnalyzer Category 5e Electrical Installation Tester (* * Japan Region)
  DTX-ELTPRO	CableAnalyzer Class 6 Long Term Link Adapter Electrical Installation Validator (* * Europe, Middle East, and Africa region).

  suite

  Model/Name	Instructions
  DTX-1800-MS	DTX-1800 with multimode and single-mode fiber modules: including DTX-1800 cable certification analyzer, DTX-M * * multimode fiber module, and DTX-S * * * single-mode fiber moduleRefer to the photo
  DTX-1800-M	DTX-1800 with multimode fiber module: including DTX-1800 cable certification analyzer and 1 set of DTX-M * * * multimode fiber module
  DTX-1800-MO	A complete set of DTX-1800 cable certification analyzer, multi-mode DTX M * * fiber module, and one DTX Compact OTDR module.Refer to the photo
  DTX-1800-MSO	DTX 1800 Copper/Fiber/OTDR Kit: Includes DTX-1800 Cable Certification Analyzer, Multimode DTX M * * and Single Mode DTX S * * Fiber (Loss/Length) Module Set, DTX Compact OTDR Module, Transmitting Fiber, Accessories, and Portable Bag.Refer to the photo
  DTX-QUAD-OTDR	DTX 1800 Compact OTDR toolkit: includes DTX-1800 cable certification analyzer host and DTX Compact OTDR module.Refer to the photo
  DTX-1200-M	DTX-1200 with multimode fiber module: including DTX-1200 cable certification analyzer and DTX-M * * * multimode fiber module
  DTX-1800-0	DTX-1800 CableAnalyzer (with Compact OTDR) for MM and SM fiber testing (* * Europe, Middle East, and Africa region)
  DTX-1200-MS	DTX-1200 with multimode and single-mode fiber modules: including DTX-1200 cable certification analyzer, DTX-M * * multimode fiber module, and DTX-S * * * single-mode fiber module

  option

  Model/Name	Instructions
  DTX-OTDR-QMOD	DTX Compact OTDR module: includes 850/1300/1310/1550 OTDR modules and a portable bag.
  DTX-1800/SR	DTX-1800 Intelligent Remote External Attachment
  DTX-LT/SR	DTX-LT Intelligent Remote External Attachment

  spare parts

  Model/Name	Instructions
  DSP-PM11A	NORDX GIGABIX (T568A) Personalized Module
  DSP-PM11B	NORDX GIGABIX (T568B) Personalized Module
  LinkWare	LinkWare Cable Test Management Software: Free download link: www.flukenetworks.com/linkware
  LinkWare-Stats	LinkWare Stats: LinkWare's statistical test result analysis software options
  NFK1-EFLC-SC	A 62.5 µ m SC/SC ring flux emission controller (DTX requires two)
  NFK1-EFLC-LC	A 62.5 µ m SC/LC ring flux emission controller (DTX requires two)
  NFK2-EFLC-SC	A 50 µ m SC/SC ring flux emission controller (DTX requires two)
  NFK2-EFLC-LC	A 50 µ m SC/LC ring flux emission controller (DTX requires two)
  DTX-CASE	Hard portable case - DTX seriesRefer to the photo
  DTX-TSET	Headphones for DSP and DTX Cable Analysts
  DTX-ACUN	Universal AC charger
  DTX-ACNA	Communication charger, North America
  DTX-CASE	Standard Portable Bag - DTX Series
  DTX-STRP	DTX Strap
  DTX-USB	USB interface cable (Mini-B)
  DTX-SER	Serial RS-232 cable (DB-9 to IEEE 1394)
  DSP-MCR-U	Multimedia storage card * * *, USB cable
  DTX-LION	Lithium ion battery pack
  Copper cable adapter and accessories
  DTX-10GKIT	The DTX-1800 External Interference Analyzer Kit includes: two DTX-AXTLK1 communication modules, Windows version DTX AxTalk AnalyzerTMSoftware, 2 Cat 6A/EA Long Term Link adapters (DTX-PLA002S), and 2 channel adapters optimized for external crosstalk measurement (DTX-CHA002AS)
  DTX-AXKIT	The DTX-1800 External Interference Analyzer Kit includes: two DTX-AXTLK1 communication modules, Windows version DTX AxTalk AnalyzerTMSoftware, two terminators (common mode and differential mode), and two 8-pin couplers (CIQ-RJA).
  DTX-NSM	Insert the DTX network module into the back of the DTX tester main unit. It can perform network connection testing, test Ethernet power supply according to standards, and analyze the network ports connected to the link.
  DTX-COAX	DTX coaxial cable test adapter (including 2 adapters)
  DTX-PC5ES	DTX patch cord test adapter kit for 5e category patch cords. According to ANSI/TIA 568-C and ISO standards, suitable for shielded and unshielded Category 5e patch cords 11801:2010. Refer to the image
  DTX-PC6S	DTX patch cord test adapter kit for 6 categories of patch cords. According to ANSI/TIA 568-C and ISO standards, it is suitable for shielded and unshielded type 6 patch cords 11801:2010. Refer to the image
  DTX-PC6AS	6ACategory patch cord DTX patch cord test adapter kit. According to ISO standards, suitable for shielded and unshielded category 6APlug in wire 11801:2010.
  DTX-PCTAC5EKS	Double shielded Cat 5e socket. Recommended Replacement for DTX-PC5ES Plug in Test Adapter
  DTX-PCTAC6KS	Double shielded Cat 6 socket. Recommended replacement for DTX-PC6S patch cord test adapter.
  DTX-PCTAC6AKS	Double shielded Cat 6A socket. Recommended replacement for DTX-PC6AS plug-in test adapter.
  DSP-PCI-C6JACK	Cat 6 spare socket for DSP-PCI-C6 jumper adapter, 10 piece set
  DTX-PLA002S	A 2-piece set of long-term link adapters for Cat 6A and external crosstalk testing. This adapter can be used for all long-term link testing Cat 6A/6/5e/5 and Cat 3.
  DTX-PLA002	A long-term link adapter for Cat 6A and Alien Cross Talk testing. This adapter can be used for all long-term link testing Cat 6A/6/5e/5 and Cat 3.
  DTX-PLCAL	Long term link adapter on-site verification module. The automation program under "Utilities" in LinkWare (version 2.71 or higher) allows users to use this module to verify the return loss performance of the DTX-PLA002 adapter.
  DTX-PLA002PRP	DTX-PLA002 plug spare parts. It includes contact blocks for two 8-pin module plugs.
  DTX-PLA001S	A 2-piece set of long-lasting link adapters with PM06 personalized module. This adapter is compatible with all DSP PMxx personalization modules.
  DTX-PLA001	1 long-term link adapter for DTX series CableAnalyzer. This adapter is compatible with the DSP PMxx personalization module, but does not include a personalization module.
  DTX-GG45-KIT	GG45 adapter kit
  DTX-TERA	The TERA adapter kit includes TERA channel adapter (2) and TERA long-term link adapter (2) for testing Siemon TERA F-class systems
  DTX-PLA011	One (1) TERA long-term link adapter for Siemon TERA F-class and Fa systems. Note: You will also need at least one (1) DTX-CHA011 adapter.
  DTX-CHA011	TERA channel adapter for Siemon TERA F-class systems
  DTX-CHA002S	Optimization of the two-piece set for testing Cat 6A/Ea level channel adapters for external crosstalk. These adapters can be used to test Cat 6A/6/5e/5/3 and Ea/E/D with C-class channels.
  DTX-CHA002	Optimize Cat 6A/EA level channel adapters for testing external crosstalk. These adapters can be used to test Cat 6A/6/5e/5/3 and Ea/E/D with C-class channels.
  Fiber optic cable module and accessories
  NFK3-LAUNCH-E2K	SC/E2000 transmitting fiber optic SM
  NFK3-LAUNCH-FC	SC/FC transmitting fiber optic SM
  NFK3-LAUNCH-LC	SC/LC transmitting fiber optic SM
  NFK3-LAUNCH-ST	SC/ST transmitting fiber optic SM
  NFK3-LAUNCH	SC/SC transmitting fiber optic SM
  NFK2-LAUNCH-E2K	SC/E2000 LAUNCH FIBER 50 µm
  NFK2-LAUNCH-FC	SC/FC LAUNCH FIBER 50 µm
  NFK2-LAUNCH-LC	SC/LC LAUNCH FIBER 50 µm
  NFK2-LAUNCH-ST	SC/ST LAUNCH FIBER 50 µm
  NFK2-LAUNCH	SC/SC LAUNCH FIBER 50 µm
  NFK1-LAUNCH-FC	SC/FC LAUNCH FIBER 62.5 µm
  NFK1-LAUNCH-LC	SC/LC LAUNCH FIBER 62.5 µm
  NFK1-LAUNCH-ST	SC/ST LAUNCH FIBER 62.5 µm
  NFK1-LAUNCH	SC/SC LAUNCH FIBER 62 µm
  DTX-M***	The DTX multimode fiber module consists of two modules (one for the main tester and the other for the intelligent remote tester), each module containing a single output port combination of 850nm and -1300nm LED light sources, 850-1550nm optical power meters, integrated VFL, SC adapters for power meters, and a set of 62.5/125 SC-SC and 50/125 SC-SC test reference wires with reels (NF-MANDREL-50 and NF-MANDREL-625)
  DTX-G***	DTX gigabit multimode fiber module, including: single output port combination of 850nm VCSEL light source and 1310nm laser light source; 850-1550nm optical power meter; Integrated VFL; SC adapter for power meter and a set of 50/125 SC-SC test reference wires
  DTX-S***	The DTX single-mode fiber module consists of two modules (one for the main tester and the other for the intelligent remote tester). Each module includes a single output port combination of 1310 nm and 1550 nm laser light sources, 850-1550 nm power meters, integrated VFL, and SC adapters for power meters and single-mode SC-SC test reference wires. Guangdong Fluke DTX1800 cable certification analyzer
  DTX-FTK	The DTX fiber optic testing kit includes a DTX-FOM optical power meter, SimpliFiber 850 nm and 1300 nm LED light sources, a portable case, and a multilingual user guide
  DTX-OTDR/LL-KIT	DTX Compact OTDR and Loss Length Toolkit: Includes multimode DTX M * * and single-mode DTX S * * fiber (loss/length) module kits DTX Compact OTDR、 Launch fiber optic cables, accessories, and portable bags.
  DTX-OTDR-KIT	DTX OTDR accessory kit: includes DTX Compact OTDR module, transmission fiber, accessories, and portable bag.
  NFA-SC	Two piece set for SC adapter for DTX-x * * * power meter port.
  NFA-LC	Two piece set for LC adapter for DTX-x * * * power meter port.
  NFA-ST	Two piece set for ST adapter for DTX-x * * * power meter port.
  NFA-FC	FC test adapter, two-piece set
  NFB1/2-LC/ST	Including test reference lines NFK1-DPLX-LC, NFK1-DPLX-ST, NFK2-DPLX-LC, NFK1-DPLX-ST, LC and ST adapters for power meters, and kits for 62.5/125 and 50/125.
  NFK1-DPLX-SC	Duplex MM 62.5 µ m TRC for SC adapter, 2-piece set
  NFK1-DPLX-LC	Duplex MM 62.5 Guangdong Fluke DTX1800 Cable Certification Analyzer
  NFK1-DPLX-ST	Duplex MM 62.5
  NFK1-DPLX-FC	Duplex MM 62.5
  NFK2-DPLX-SC	Duplex MM 50
  NFK2-DPLX-LC	Duplex MM 50
  NFK2-DPLX-ST	Duplex MM 50
  NFK2-DPLX-FC	Duplex MM 50
  NFK3-DPLX-SC	SC adapter duplex SM TRC, 2-piece set
  NFK3-DPLX-LC	LC adapter duplex SM TRC, 2-piece set
  NFK3-DPLX-ST	ST adapter duplex SM TRC, 2-piece set
  NFK3-DPLX-FC	FC adapter duplex SM TRC, 2-piece set
  NFK1-LC	LC accessory toolkit, 62.5 Guangdong Fluke DTX1800 cable certification analyzer
  NFK1-MANDREL-KIT	Multimode fiber spool kit, including two red spools for 50/125 µ m cables and two gray spools for 62.5/125 µ m cables
  NF-MANDREL-50	Multimode fiber spool, used for 50/125 fiber optic cables
  NF-MANDREL-625	Multimode fiber spool, used for 62.5/125 fiber optic cables
  NFC-Kit-Case	Fiber optic cleaning kit
  NF400	Fiber optic accessory portable bag
  DTX-FIBER-CASE	Protection package for DTX Compact OTDR toolkit
  DTX-FBRCSE	DTX-xFM or DTX-x * * * Fiber Loss Test Module Portable Bag, containing storage space for test reference wires and fiber connector adapters
  Personalized module
  DSP-PM19B	SYSTIMAX ® VisiPatch ® 360 (T568B) Personalized Module
  DSP-PM19A	SYSTIMAX ® VisiPatch ® 360 (T568A) Personalized Module
  DSP-PM17B	TYCO/AMP 610XC connector (T568B) personalized module
  DSP-PM17A	TYCO/AMP 610XC connector (T568A) personalized module Guangdong Fluke DTX1800 cable certification analyzer
  DSP-PM16B	LEVITON 110 (T568B) Personalization Module
  DSP-PM16A	LEVITON 110 (T568A) Personalization Module
  DSP-PM15B	ADC/KRONE High Band (T568B) Personalized Module
  DSP-PM15A	ADC/KRONE High Band (T568A) Personalized Module
  DSP-PM14B	ADC/KRONE ULTRAM8 (T568B) Personalization Module
  DSP-PM14A	ADC/KRONE ULTRAM8 (T568A) Personalization Module
  DSP-PM13B	SIEMON A10 (T568B) Personalization Module
  DSP-PM13A	SIEMON A10 (T568A) Personalization Module
  DSP-PM12B	PANDUIT GIGAPUNCH (T568B) Personalization Module
  DSP-PM11B	Gerard Industries CP GigaPro (T568B) Personalization Module
  DSP-PM11A	Gerard Industries CP GigaPro (T568A) Personalization Module
  DSP-PM10B	SYSTIMAX ® 110 (T568B) Personalized Module Guangdong Fluke DTX1800 Cable Certification Analyzer
  DSP-PM10A	SYSTIMAX ® 110 (T568A) Personalized Module
  DSP-PM06	Two Cat 6 centralized personalization modules for testing long-term links. These modules can be used to test Cat 6/5e/5 and Cat 3 links.

  support

  Model/Name	Instructions
  GLD-DTX	DTX CableAnalyzer models with one-year * * support: DTX-1800, DTX-1200, or DTX-LT (optional three-year * * support: GLD-DTX-3YEAR).
  GLD-DTX-M	One year * * support for DTX-1800-MS or DTX-1200-M includes host, intelligent remote, DTX-M * * multimode fiber module kit (optional three-year * * support: GLD3-DTX-M).
  GLD-DTX-MS	One year * * support for DTX-1800-MS or DTX-1200-MS includes host, intelligent remote, multimode, and single-mode fiber module sets (optional three-year * * support: GLD-DTX-MS-3YR).
  GLD-DTX-MO	The DTX-1800-MO supports host, intelligent remote, multi-mode fiber optic kit, and OTDR module for one year (optional three-year support: GLD-DTX-MO-3YR). Guangdong Fluke DTX1800 Cable Certification Analyzer
  GLD-DTX-MSO	DTX-1800-MSO supports host, intelligent remote, multi-mode and single-mode fiber module sets, and OTDR modules for one year (optional three-year support: GLD-DTX-MSO-3YR).
  GLD-DTX-FIBERMOD	DTX Fibermodule package models that offer one-year * * support: DTX-M * * *, DTX-G * * *, or DTX-S * * * (optional three-year * * support: GLD-DTXFMOD-3YEAR).
  GLD-DTX-OTDR	One year * * support for DTX-OTDR-QMOD and DTX-OTDR-KITOnly covers OTDR moduleTo obtain the * * support benefits of DTX-QUAD-OTDR, you must purchase GLD-DTX-OTDR and GLD-DTX to cover both OTDR and DTX hosts (you can also choose three-year * * support: GLD-DTX-OTDR-3YR).
  GLD-DTX-KIT	1-year * * support benefit applicable to DTX-10GKIT or DTX-AXKIT

  Cable Type Standard Link Interface Adapter	Shielded and unshielded twisted pair (STP, FTP, SSTP, and UTP) LAN cabling: TIA 3, 4, 5, 5E and 6A: 100 Ω ISO/IEC Class C and D: 100 Ω and 120 Ω ISO/IEC Class E, 100 Ω ISO/IEC Class F, 100 Ω Cat 6A /EAType and lifespan of long-term link adapter plugs: shielded and unshielded cables, TIA Cat 3, 4, 5, 5e, 6, 6A and ISO/IEC C, D, E and EALevel Long Term Link Cat 6A /EAType and lifespan of level channel adapter plugs: shielded and unshielded cables, TIA Cat3, 4, 5, 5e, 6, 6A and ISO/IEC C, D, E and EALevel channel
  Test Standard	TIA3、5e、 Category 6, according to ANSI/TIA-568-C.2 TIA Category 5 (1000BASE-T), according to TIA TSB-95 TIA Category 6, according to TIA/EIA-568B.2-1 TIA Class 6A, according to ANSI/TIA-568-C-2 (only 6A DTX-1800) TIA TSB-155 (DTX-1800 only) TR 24750 (DTX-1800 only) ISO/IEC 11801 Class C, D, E ISO/IEC 11801 Ea and F levels (DTX-1800 only) EN 50173 C、D、E 级 EN 50173 EAGrade and F (DTX-1800 only) ANSI TP-PMD IEEE 802.3 10BASE-T、100BASE-TX 和 1000 BASE-TX IEEE 802.3an 10BASE-T
  Automatic testing speed	The complete automatic testing of bidirectional Category 6 twisted pair links can be completed within 9 seconds The complete bidirectional 6A ISO/IEC F-class link automatic testing can be completed within 22 seconds
  Supported testing parameters	The testing parameters and frequency range are determined by the selected testing standards wiring diagram length transmission delay Delay Time Difference DC loop impedance Insertion loss (attenuation) Return loss (RL), remote return loss Near end crosstalk, far end near end crosstalk Attenuation crosstalk ratio (ACR-N), far end attenuation crosstalk ratio ACR-F（ELFEXT）、 Remote ACR-F Integrated ACR-F (ELFNEXT), Remote Integrated ACR-F Integrated near end crosstalk and far end integrated near end crosstalk Integrated ACR-N, Remote Integrated ACR-N Integrated External Near End Interference (PS ANEXT) Comprehensive external attenuation far end crosstalk ratio (PS AACR-F)

  
  

  Cable audio generator	Generate audio that can be detected by audio probes such as Fluke Networks IntelliTone probes. Generate audio on all line pairs. All line to line frequency range: Audio frequency range: 440 Hz to 831 Hz
  display screen	Diagonal length of 3.7 inches (9.4 centimeters), width of 240 dots, height of 320 dots, pseudocolor, transmissive LCD with backlight.
  Input protection	Can withstand continuous telephone voltage and 100 mA overcurrent. Occasional ISDN overvoltage will not cause instrument damage
  luggage and bags	Impact resistant plastic box wrapped with shock-absorbing material
  volume	Host and intelligent remote: 8.5 inches x 4.4 inches x 2.4 inches (21.6 cm x 11.2 cm x 6 cm), rated
  weight	2.4 pounds (1.1 kilograms), nominal (without adapter or module)
  Operating temperature	32 ° F to 104 ° F (0 ° C to 40 ° C)
  Storage temperature	-4 ° F to ° F (-20 ° C to ° C)
  Relative humidity at work (% RH without condensation)	32 ° F to 95 ° F (0 ° C to 35 ° C): 0% to 90% 95 ° F to 113 ° F (35 ° C to 45 ° C): 0% to 70%
  vibration	Random, 2 g, 5 Hz -500 Hz
  impact	1-meter drop test (with or without modules and adapters)
  safety	CSA C22.2 No. 1010.1:1992 EN 61010-1 First Edition Revision 1,2
  pollution level	Level 2 pollution described in IEC 60664, complying with IEC 60950 "Safety of Information Technology Equipment, 1999" standard
  altitude	Working hours: 4000 meters; Storage time: 12000 meters
  EMC	EN 61326-1
  power supply	Host and Remote: Lithium ion Battery Pack, 7.4 V, 4000 mAh Typical battery life: 12 to 14 hours Charging time (off state): 4 hours (below 40 ° C) AC adapter/charger, US version: linear power supply; Input AC voltage of 108V to 132V, 60 Hz; Output DC voltage 15 V, 1.2 A AC adapter/charger, international version: switch power supply; Input AC voltage 90 V to 264 V, 48 to 62 Hz; output DC voltage 15 V, 1.2 A (isolated output) Backup battery for storage unit in the host: lithium battery Typical lifespan of lithium batteries: 5 years The battery will not charge outside the temperature range of 0 ° C to 45 ° C (32 ° F to 113 ° F). The charging efficiency of the battery will decrease within the temperature range of 40 ° C to 45 ° C (104 ° F to 113 ° F).
  Supported Languages	UK, France, Germany, Spain, Portugal, Italy, Japanese, Simplified Chinese, Traditional Chinese, Korean, Russian, Czech, Polish, Swedish, Hungarian.
  verify	The calibration cycle of the maintenance center is one year

  
  

  Performance Specifications	Note: All technical specifications for testing twisted pair cabling are applicable to 100 Ω cables. For information on testing performance of other impedance cables, please contact Fluke Networks.
  Baseline accuracy	Within the frequency range supported by the tester, the baseline accuracy of all DTX series testers meets or exceeds the IV level required by IEC 61935-1/Ed. 3 standard.
  Class 6A/EALevel Link Test Mode (Backward Compatibility)	The DTX cable analyzer far exceeds the Class III accuracy requirements of ANSI/TIA-1152 and IEC 61935-1/Ed. 3 standards
  F-level link testing mode	DTX-1800 meets or exceeds the IV level accuracy requirement of IEC 61935-1/Ed. standard.
  Twisted pair wiring length	(The length index does not include the uncertainty of cable NVP values)
  parameter	Single ended testing Dual end testing (main tester and remote tester)
  scope	Single end test: 800 meters (2600 feet) Dual end testing (main tester and remote tester): 150 meters (490 feet)
  resolution	Single ended testing: 0.1 meters or 1 foot Dual end testing (main tester and remote tester): 0.1 meters or 1 foot
  precision	Single ended test: ± (1 meter 4%) Dual end testing (main tester and remote tester): ± (1 meter 4%)
  Delay Time Difference
  parameter	Twisted pair wiring
  scope	0 ns to 100 ns
  resolution	1 ns
  precision	± 10 ns
  DC Loop Resistance Test
  parameter	Twisted pair wiring
  scope	O Ω 至 53Ω
  resolution	0.1 Ω
  precision	±(1Ω to 1%)
  Overload recovery time	Restore rated accuracy within 10 minutes after overvoltage. After repeated or long-term overvoltage, it is necessary to reset the benchmark.