Guwei PSU series programmable switch DC power supply-Fornitore globale

Room 1008, Building C, Xinghe Legend Phase III Commercial Building, Lvjing Road, Minzhi Street, Longhua District, Shenzhen

PSU系列可编程开关直流电源

Characteristics of Guwei PSU series programmable switch DC power supply

Rated voltage output: 6V / 12.5V / 20V / 40V / 60V/ 100V/ 150V/ 300V/ 400V/ 600V

Rated power output: 1200W~1560W

● C.V/C.C priority mode

Adjustable voltage/current rise and fall slope

● Series/parallel expansion capability (up to 2 units of the same model (limited to models below 300V)/up to 4 units of the same model)

● High efficiency and high power density

Design with 1U height and 19 "Rack Mount Size

● 3 sets of Preset Functions

● Front panel sequence programming function

● Bleeder Control function

● Internal Resistance function

● Panel locking function

● Protection function: OVP, OCP, OHP,UVL, AC Fail, FAN Fail

● Standard configuration: USB, LAN, RS-232, RS-485, Simulation control interface

● Optional: GPIB、 Insulation simulation interface (voltage control type), insulation simulation interface (current control type)

● CE certification

The newly launched PSU high-voltage model by Guwei Electronics inherits the high power density and 1U height appearance of PSU, and provides a maximum voltage output of 600V and a maximum power of 1560 watts. There are five types of PSU high-voltage models, namely PSU 100-15, PSU 150-10, PSU 300-5, PSU 400-3.8, PSU 600-2.6。 The PSU high-voltage model can meet the wider voltage requirements of the PSU series in the 1U power supply market, and also provide system integrators with more flexible system integration.
The PSU series with flexible configuration can reduce the investment in testing equipment required by different voltage or current testing specifications. The PSU series is a single programmable DC power supply with output power ranging from 1200W to 1560W. The PSU series offers 2 series connection modes (limited to models below 300V) or 4 parallel connection modes. Therefore, the maximum voltage of this series of models after series connection is 600V, the maximum current after parallel connection is 800A, and the maximum output power is 6.24 kilowatts.
The PSU series is a power supply that can be set with either constant current (CC) priority or constant voltage (CV) priority. The PSU series power supply can adjust the slope of the output voltage or current according to the user's testing needs in constant voltage or current mode. The slope setting is divided into two types: high-speed priority or slope priority. The high-speed priority slope is set to the current or voltage changes in constant current (CC) or constant voltage (CV) mode at the highest speed. The slope priority mode allows users to adjust the slope in constant current (CC) or constant voltage (CV) mode, and can be used to control the rising or falling slope through this function. Suitable for motor testing, it suppresses surge current at the moment of starting and protects the tested object.

attachment
CD-ROM x 1 (user manual, programming manual), output terminal cover x 1, analog control socket kit x 1, power cord, output terminal M8 screw set x 1 (only applicable to PSU 6-60V models), input terminal cover x 1, 1U handle (RoHS), 1U bracket (left, RoHS), 1U bracket (right, RoHS), packaging list * CTC GW/Instek for use in Japan (RoHS)

Option
PSU-01B busbar, used for parallel connection of 2 units
PSU-01C data cable, used for parallel connection of 2 units
PSU-02B busbar, used for parallel connection of 3 units
PSU-02C data cable, used for parallel connection of 3 units
PSU-03B busbar, used for parallel connection of 4 units
PSU-03C data cable, used for parallel connection of 4 units
PSU-232 RS232 cable with DB9 connection kit
PSU-485 RS485 cable with DB9 connection kit
PSU-01A 2 PSU vertically stacked connection, 2U handle x 2, connection board x 2
PSU-02A 3 PSU vertically stacked connection, 3U handle x 2, connection board x 2
PSU-03A 4 PSU vertically stacked connection, 4U handle x 2, connection board x 2
PSU-ISO-I PSU-ISO-I Independent Current Remote Control Card (Return to Factory)
PSU-ISO-V Independent Voltage Remote Control Card (Return to Factory)
GTL-246 USB data cable, USB 2.0A-B class, 4P
GRM-001 slider 2 pcs/set, PSU optional
PSU-GPIB GPIB interface card (returned to factory)
GPW-001 UL/CSA power cord 3m, optional PSU
GPW-002 VDE power cord 3m, optional PSU
GPW-003 PSE power cord 3m, optional PSU

ordering information

PSU 100-15 1500W Programmable Switching DC Power Supply
PSU 150-10 1500W Programmable Switching DC Power Supply
PSU 300-5 1500W Programmable Switching DC Power Supply
PSU 400-3.8 1520W Programmable Switching DC Power Supply
PSU 600-2.6 1560W Programmable Switching DC Power Supply
PSU 6-200 1200W Programmable Switching DC Power Supply
PSU 12.5-120 1500W Programmable Switching DC Power Supply
PSU 20-76 1520W Programmable Switching DC Power Supply
PSU 40-38 1520W Programmable Switching DC Power Supply
PSU 60-25 1500W Programmable Switching DC Power Supply

PSU series programmable switch DC power supply model parameters

model	PSU 6-200	PSU 12.5-120	PSU 20-76	PSU 40-38	PSU60-25
Rated Output
voltage	0~6V	0~12.5V	0~20V	0~40V	0~60V
electric current	0~200A	0~120A	0~76A	0~38A	0~25A
power	1200W	1500W	1520W	1520W	1500W
Output ripple and noise
CV p-p (0~20MHz)	60mV	60mV	60mV	60mV	60mV
CV rms (5Hz~1MHz)	8mV	8mV	8mV	8mV	8mV
CC rms (5Hz~1MHz)	400mA	240mA	152mA	95mA	75mA
Load regulation rate (full load 10%~90%)
Voltage (0.01% F.S.+2mV)	2.6mV	3.25mV	4mV	6mV	8mV
Current (0.02% F.S.+2mA)	45mA	29mA	20.2mA	12.6mA	10mA
Voltage regulation rate (85~132 VAC input or 170~265 VAC)
Voltage (0.01% F.S.+2mV)	2.6mV	3.25mV	4mV	6mV	8mV
Current (0.02% F.S.+2mA)	22mA	14mA	9.6mA	5.8mA	4.5mA
Programming accuracy
Voltage 0.05%+offset (mV)	3mV	6.25mV	10mV	20mV	30mV
Current 0.2%+offset (mA)	200mA	120mA	76mA	38mA	25mA
measurement accuracy
Voltage 0.1%+offset (mV)	6mV	12.5mV	20mV	40mV	60mV
Current 0.1%+offset (mA)	400mA	240mA	152mA	76mA	50mA
Instantaneous load recovery time
time	1.5ms	1.5ms	1ms	1ms	1ms
Output response time (using 0-10V stepping)
Simulated programming source and resistance load measurement
Rise time (empty load&full load)	80ms	80ms	80ms	80ms	80ms
Descent time (unloaded)	500ms	700ms	800ms	1000ms	1100ms
Descent time (full load)	10ms	50ms	50ms	80ms	80ms
Programming/Measurement Resolution
voltage	0.2mV	0.4mV	0.7mV	1.3mV	2mV
electric current	6mA	4mA	2.5mA	1.2mA	0.8mA
Temperature coefficient (heated for 30 minutes)
voltage	100PPM/℃
electric current	100PPM/℃
series-parallel operation
parallel operation	Up to 4 hosts included
Concatenation Operator	Maximum of 2 hosts included
environmental condition
environment	Indoor, installation level II (AC input), pollution level 2
Operating temperature range	0℃~50℃
Storage Temperature Range	-25℃~70℃
Operating humidity range	20%~85%RH
Storage humidity range	Maximum 90% or less relative humidity (no condensation)
ac input
Normal input	100 VAC~240 VAC, 50Hz~60Hz, single-phase
input range	85 VAC~265 VAC
Power factor (100Vac/200Vac)	0.99/0.98
Maximum input current (100Vac/200Vac)	21A/11A
surge current	≤50A
Efficiency (100Vac/200Vac)	77%/79%	82%/85%	83%/86%	84%/88%	84%/88%
Simulation control (non independent)	have
PC remote interface (standard)	USB(Device/Host)/RS-232, RS-485/LAN
PC remote interface (optional)	GPIB/Analog Control Interface (Independent Voltage Control)/Analog Control Interface (Independent Current Control);
Note: Choose one out of three
Temperature controlled fan	Internal fan cooling
Size&Weight	422.8(W)×43.6(H)×432.8(D)； About 8.7kg

model		PSU	100-15	150-10	300-5
Rated voltage (* 1)		V	100	150	300
Rated current (* 2)		A	15	10	5
rated power		W	1500	1500	1500

Fixed voltage mode		PSU	100-15	150-10	300-5
Power regulation rate (* 3)		mV	12	17	32
Load regulation rate (* 4)		mV	12	17	32
Output Ripple and Noise (* 5)	p-p (*6)	mV	80	100	150
	r.m.s. (*7)	mV	8	10	25
temperature coefficient		ppm/℃	100ppm/℃ after a 30 minute warm-up
Detecting compensation voltage (single wire)		V	5	5	5
Rise time (* 8)	Rated load	ms	150	150	150
	No load	ms	150	150	150
Descent time (* 9)	Rated load	ms	150	150	150
	No load	ms	1500	2000	2500
Response time for load changes (* 10)		ms	1	2	2

constant current mode		PSU	100-15	150-10	300-5
Power regulation rate (* 3)		mA	3.5	3	2.5
Load regulation rate (* 11)		mA	8	7	6
Output ripple and noise (* 12)	r.m.s.	mA	45	35	25
temperature coefficient		ppm/℃	100ppm/℃ after a 30 minute warm-up

Protection function		PSU	100-15	150-10	300-5
Overvoltage protection (OVP)	Setting range	V	5 - 110	5 - 165	5 - 330
	Setting accuracy	mV	1000	1500	3000
Overcurrent protection (OCP)	Setting range	A	1.5 - 16.5	January 11th	0.5 - 5.5
	Setting accuracy	mA	300	200	100
Low Voltage Limit (UVL)	Setting range		0 - 105	0 - 157.5	0 - 315
Over temperature protection (OHP)	Operation		Turn off output
Detection Line Connection Failure Protection (SENSE)	Operation		Turn off output
Low input voltage protection (AC FAIL)	Operation		Turn off output
Shutdown (SD)	Operation		Turn off output
Power Limit	Operation		Overpower limit
	Value (fixed)		Approx. 105% of rated output power

Simulate remote program control and monitoring		PSU	100-15	150-10	300-5
External voltage control output voltage			Accuracy and linearity: ±0.5% of rated output voltage.
External voltage control output current			Accuracy and linearity: ±1% of rated output current.
External resistor controls output voltage			Accuracy and linearity: ±1% of rated output voltage.
External resistor controls output current			Accuracy and linearity: ±1.5% of rated output current.
Output voltage monitoring			Accuracy: ±1%
Output current monitoring			Accuracy: ±1%
Shutdown control			Turns the output off with a LOW (0V to 0.5V) or short-circuit.
Output on/off control			Possible logic selections:
			Turn the output on using a LOW (0V to 0.5V) or short-circuit, turn the output off using a HIGH (4.5V to 5V) or open-circuit.
			Turn the output on using a HIGH (4.5V to 5V) or open-circuit, turn the output off using a LOW (0V to 0.5V) or short-circuit.
Alarm clearing control			Clear alarms with a LOW (0V to 0.5V) or short-circuit.
CV/CC/ALM/PWR ON/OUT ON display			Photocoupler open collector output; Maximum voltage 30V, maximum sink current 8mA.
Trigger Output			Maximum low level output = 0.8V; minimum high level output = 2V; Maximum source current = 8mA.
Trigger Input			Maximum low level input voltage = 0.8V; minimum high level input votage = 2V, Maximum sink current = 8mA.

front panel		PSU	100-15	150-10	300-5
Display, 4-digit, voltage accuracy	0.1% +	mV	200	300	600
Current accuracy	0.2% +	mA	45	30	15
Indication display			GREEN LED's: CV, CC, V, A, VSR, ISR, DLY, RMT, LAN, M1, M2, M3, RUN, Output ON
			RED LED's: ALM, ERR
button			Lock/Local(Unlock), PROT(ALM_CLR), Function(M1), Test(M2), Set(M3), Shift, Output
knob			Voltage, Current
USB port			Type A USB connector

Program control and measurement		PSU	100-15	150-10	300-5
(RS-232/485, USB, LAN, GPIB)		PSU	100-15	150-10	300-5
Accuracy of output voltage program control	0.05% +	mV	50	75	150
Accuracy of output current programmable control	0.2% +	mA	15	10	5
Output voltage programmable clarity		mV	3.4	5.2	10.2
Output current programmable resolution		mA	0.5	0.34	0.19
Accuracy of output voltage measurement	0.1% +	mV	100	150	300
Accuracy of output current measurement	0.2% +	mA	30	20	10
Output voltage measurement clarity		mV	3.4	5.2	10.2
Output current measurement clarity		mA	0.5	0.34	0.19

Input power characteristics		PSU	100-15	150-10	300-5
Nominal input			100Vac to 240Vac, 50Hz to 60Hz, single phase
Input Voltage			85Vac ~ 265Vac
Input frequency range			47Hz ~ 63Hz
Maximum input current	100Vac / 200Vac	A	21 / 11
inrush current			Less than 50A.
Maximum Input Power		VA	2000
Power factor	100Vac / 200Vac		0.99 / 0.98
Efficiency (* 13)	100Vac / 200Vac	%	84 / 87	84 / 87	84 / 87
Hold up time			20ms or greater

interfacial compatibility		PSU	100-15	150-10	300-5
USB			TypeA: Host, TypeB: Slave, Speed: 1.1/2.0, USB Class: CDC(Communications Device Class)
LAN			MAC Address, DNS IP Address, User Password, Gateway IP Address, Instrument IP Address, Subnet Mask
RS-232 / RS-485			Complies with the EIA232D / EIA485 Specifications
GPIB (Factory Option)			SCPI - 1993, IEEE 488.2 compliant interface

Independent Class Control Interface (Factory Option)		PSU	100-15	150-10	300-5
voltage control			Using 0-5V or 0-10V signals for programming and measurement
current control			Using 4-20mA current signals for programming and measurement

environmental condition		PSU	100-15	150-10	300-5
operate temperature			0?C to 50? C
storage temperature			-25? C to 70? C
Operating humidity			20% to 85% RH; No condensation
Storage Humidity			90% RH or less; No condensation
height			Maximum 2000m

general		PSU	100-15	150-10	300-5
weight	main unit	kg	About 8.7kg
size	(W×H×D)	mm^3	423×43.6×447.2
heat dissipation			Forced air cooling by internal fan.
electromagnetic compatibility			Complies with the European EMC directive 2004/108/EC for Class A test and measurement products.
safety			Complies with the European Low Voltage Directive 2006/95/EC and carries the CE-marking.
pressure resistance			AC to Chassis : 1500Vac / 1min
			AC to Output terminal : 3000Vac / 1min
			Vout≦150V
			Output terminal to Chassis : 1000Vdc / 1min
			150
			Output terminal to Chassis : 1500Vdc / 1min
Insulation impedance			Chassis and output terminal; chassis and AC input; AC input and output terminal: 100MΩ or more (DC 1000V)