VIP member
Product details
HDM Non Power Series Belt Transfer Station Dust Removal Equipment
◆ Technical Introduction
This device, based on the principles of aerodynamics, uses pressure balance and closed circulation to minimize the pressure of dust air in the chute to the greatest extent possible
Force to balance the pressure inside and outside the space. The coordinated work of the dust laden air automatic gyration system and the automatic wet spray system realizes the
The closed-loop virtuous cycle of gas and dust, combined with the wet dust reduction system and polymer dust blocking sealing curtain, prevents dust from overflowing and polluting the environment.
Dust air circulation system
When materials are transported and dropped from top to bottom, a large amount of impact dust will be generated in the drop pipe and guide groove. This system is installed in the guide groove and
Between the chutes, the principle of pressure balance and laminar flow effect are used to separate the dusty air and material flow when the material falls, resulting in positive pressure dusty air
By using a rotating device to return to the neck of the chute, the upper negative pressure air source is replenished, thereby reducing the air pressure inside the guide chute and at the drop point.
◆ Gas dust separation device
Due to the inability of the circulation system to fully handle the positive pressure generated when materials fall, a gas dust separation device is installed after the circulation system. should
The device can fully release the positive pressure inside the guide groove, so that the pressure inside the guide groove tends to balance with the external air pressure. The metal inside the device is independently developed by our company
The filter screen or filter material adopts a unique filtering structure to make the device have the characteristics of high filtration accuracy, long service life, and no dust accumulation or blockage.
◆ Wet dust reduction system
The atomization dust reduction device can wet dry materials and dust during the material conveying process, increasing the interaction between materials and dust, and between dust and dust
The affinity between them causes dust to adhere to the material. It can also combine dust with polymer dust blocking sealing curtains, and fall back and forth under the action of gravity
Conveyor belt, thus achieving the goal of recycling without secondary dyeing (this device can also be used without the need for users to have requirements for material humidity)
Installation).
◆ After sales service
Our company has always attached great importance to after-sales service of our products. When users make specific requirements, we can provide targeted solutions
Provide reference for users until they are satisfied.
After the product is sold to users, relevant personnel should be dispatched promptly for on-site service, installation, and debugging until it is delivered for use.
When equipment problems occur during operation, arrive at the site within 48 hours after receiving notification from the user and actively cooperate with the user to solve the problems
Free job training for operators.
Online inquiry
-
Contacts
-
Company
-
Telephone
-
Email
-
WeChat
-
Verification Code
-
Message Content
-